📚 Exam by Category
▾
Objective Questions

Latest WBPDCL Assistant Manager Mechanical Exam Question (Objective Questions), MCQ in English

Subjects : General Aptitude, Mechanical, Bengali

Question Bank WBPDCL Assistant Manager Mechanical Exam - English
Back to Exam

General Aptitude

Question 1Single Answer
Yojna a weekly journal
  1. A
    Ministry of Finance        
  2. B
    Ministry of Information and Broadcastin
  3. C
    Ministry of Rural Development
  4. D
    Planning Commission
Question 2Single Answer
I go to Madurai by —– Vaigai Express
  1. A
    a
  2. B
    an
  3. C
    some
  4. D
    the
Question 3Single Answer
Have the car stolen!
  1. A
    Steal the car
  2. B
    You should have the stolen car
  3. C
    Get someone to steal the car
  4. D
    They have stolen the car
Question 4Single Answer
Passage :
Direction :  Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has ……………a centralized online databank system for all statutory government bodies to …………an eye on their assets and liabilities.
  1. A
     presented , stay
  2. B
    introduced , keep
  3. C
    announce , make
  4. D
    created , let
  5. E
    proclaimed , hold
Question 5Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
  1. A
    liabilities
  2. B
    responsibilities
  3. C
    estates
  4. D
    profits
Question 6Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
  1. A
    Two
  2. B
    Three
  3. C
    Five
  4. D
    Four
  5. E
    None of these
Question 7Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
  1. A
    True
  2. B
    False
  3. C
    Uncertain
  4. D
    None
Question 8Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
  1. A
    X
  2. B
    W
  3. C
    I
  4. D
    H
Question 9Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
  1. A
    SUM
  2. B
    BIG
  3. C
    Both BIG and THE
  4. D
    FOR
  5. E
    Both FOR and BIG
Question 10Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
  1. A
    51:52
  2. B
    52:53
  3. C
    51:53
  4. D
    52:55
Question 11Single Answer
Which of the following numbers is irrational ?
  1. A
    √49
  2. B
    0.125
  3. C
    √2
  4. D
    22/7
Question 12Single Answer
356 x 936 – 356 x 836 = ?
  1. A
    35600  
  2. B
    34500
  3. C
    9630
  4. D
    93600
Question 13Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
  1. A
    3/4 > 7/10 > 5/8
  2. B
    7/10 > 3/4 > 5/8
  3. C
    3/4 > 5/8 > 7/10
  4. D
    5/8 > 7/10 > 3/4
Question 14Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer  :
How many employees of bank ‘X’ opted for VRS ?
(I) 18% of the 950 officer cadre employees and 6% of the 1100 of all other cadre employees opted for VRS.
(II) 28% of the employees in the age group of 51 to 56 and 17% of the employees in all other age groups opted for VRS.
  1. A
    Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
  2. B
    Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
  3. C
    BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
  4. D
    EACH statement ALONE is sufficient
Question 15Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer  :
The area of a playground is 1600 square meters. What is its perimeter ?
(I) It is a perfect square playground
(II) It costs Rs.3200 to put a fence around the playground at the rate of Rs.20 per meter.
  1. A
    Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
  2. B
    Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
  3. C
    BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
  4. D
    EACH statement ALONE is sufficient
Question 16Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer  :
What is the value of m – n ÷ 37 ?
(I) m is the largest possible six-digit number and n is the smallest possible six-digit number.
(II) The difference between m and n is known.
  1. A
    Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
  2. B
    Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
  3. C
    BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
  4. D
    EACH statement ALONE is sufficient
Question 17Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer  :
What is the value of x  ?
(I) If 10 is added to x, the result is 34.
(II) If x is multiplied by y, the result is 38.
  1. A
    Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
  2. B
    Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
  3. C
    BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
  4. D
    EACH statement ALONE is sufficient
Question 18Single Answer
The first Metro Railway Service in Kolkata began in the year
  1. A
    1984
  2. B
    1981
  3. C
    1975
  4. D
    1979
Question 19Single Answer
Kolkata - Mumbai National Highway via Agra is known as
  1. A
    NH-5
  2. B
    NH-8
  3. C
    NH-3
  4. D
    NH-6
Question 20Single Answer
Which state is hosting the National SARAS Mela 2025?
  1. A
    Karnataka
  2. B
    Maharashtra
  3. C
    Kerala
  4. D
    Gujarat

Mechanical

Question 21Single Answer
Which of the following is the unit of kinematic viscosity _________________?
  1. A
    Pascal
  2. B
    Poise
  3. C
    Stoke
  4. D
    Faraday
  5. E
    None of the above
Question 22Single Answer
Consider the following processes:
1. Extension of a spring
2. Plastic deformation of a material
3. Magnetization of a material exhibiting hysteresis
Which of the above process are irreversible?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    1 only                        
  4. D
    1, 2 and 3
Question 23Single Answer
Which of the following statements are correct for a throttling process?
1. It is an adiabatic steady flow process
2. The enthalpy before and after throttling is same
3. In the processes, due to fall in pressure, the fluid velocity at outlet is always more than inlet velocity
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    2 and 3 only                        
  4. D
    1, 2 and 3
Question 24Single Answer
A Reversed Carnot Engine removes 50 kW from a heat sink. The temperature of the heat sink is 250 K and the temperature of the heat reservoir is 300 K. The power required of the engine is
  1. A
    10 kW      
  2. B
    20 kW
  3. C
    30 kW    
  4. D
    50 kW
Question 25Single Answer
A heat engine receives heat at the rate of 2500 kJ/min and gives an output of 12.4 kW. Its thermal efficiency is, nearly
  1. A
    18%                        
  2. B
    23%
  3. C
    26%                        
  4. D
    30%
Question 26Single Answer
Consider the following motions :
1. Piston reciprocating inside an engine cylinder
2. Motion of a shaft between foot-step bearings
Which of the above can rightly be considered as successfully constrained motion?
  1. A
    1 only                     
  2. B
    2 only
  3. C
    Both 1 and 2           
  4. D
    Neither 1 nor 2
Question 27Single Answer
A rotor weighing 2 kN is supported on bearings A and B which are 1 m apart. The centre of mass of the rotor is at a distance 0.4 m from bearing A. It is observed that there is an unbalanced couple of magnitude 300 N-m which leaves the shaft balanced statically.The dynamic reactions at the supports will be
  1. A
    800 N and 800 N
  2. B
    300 N and 800 N
  3. C
    800 N and – 300 N
  4. D
    300 N and – 300 N
Question 28Single Answer
A cam is a mechanical member used to impart a desired motion to a follower by direct contact. Which one of the under-listed follower motion types will produce the least jerk to the system?
  1. A
    Simple harmonic
  2. B
    Constant acceleration and deceleration
  3. C
    Constant velocity
  4. D
    Cycloidal
Question 29Single Answer
In a circular are cam with a roller follower, acceleration of the follower depends on
1. cam speed and location of centre of circular arc
2. roller diameter and radius of circular arc
Which of the above is/are correct?
  1. A
    1 only                     
  2. B
    2 only
  3. C
    Both 1 and 2           
  4. D
    Neither 1 nor 2
Question 30Single Answer
A manufacturing company is selling a product for 15 per unit with variable cost of  10 per unit. The fixed cost of the asset is 50,000. How many units should be produced to breakeven?
  1. A
    2000                       
  2. B
    5000
  3. C
    8000                       
  4. D
    10000
Question 31Single Answer
A spherical waterdrop of 1 mm in diameter splits up in air into 64 smaller drops of equal size. The surface tension coefficient of water in air is 0.073 N/m. The work required in splitting up the drop is
  1. A
    0.96 × 10–6 J            
  2. B
    0.69 × 10–6 J
  3. C
    0.32 × 10–6 J            
  4. D
    0.23 × 10–6 J
Question 32Single Answer
Consider the following statements pertaining to stability of floating bodies:
1. A floating body will be stable when the centre of gravity is above the centre of buoyancy.
2. The position of metacentres corresponding to different axes of rotation are generally different for the same floating object.
3. For cargo ships, the metacentric height varies with loading.
Which of the above statements are correct?
  1. A
    1, 2 and 3                
  2. B
    1 and 2 only
  3. C
    1 and 3 only                        
  4. D
    2 and 3 only
Question 33Single Answer
Water is coming out from a tap and falls vertically downwards. At the tap opening, the stream diameter is 20 mm with uniform velocity of 2 m/s. Assuming steady inviscid flow, constant pressure atmosphere everywhere, and neglecting curvature and surface tension effects, the diameter of the stream 0.5 m below the tap opening is nearly
  1. A
    11.7 mm                  
  2. B
    14.6 mm
  3. C
    17.5 mm                  
  4. D
    20.4 mm
Question 34Single Answer
Consider the following statements:
1. At low Reynolds numbers of any flow, viscous forces dominate over inertial forces.
2. Transition from laminar to turbulent flow occurs over a range of Reynolds numbers depending on the surface presented to the flow.
Which of the above statements is/are correct?
  1. A
    1 only                     
  2. B
    2 only
  3. C
    Both 1 and 2           
  4. D
    Neither 1 nor 2
Question 35Single Answer
In a steady laminar flow of a given discharge through a circular pipe of diameter D, the head loss is proportional to
  1. A
    D–1                          
  2. B
    D–2
  3. C
    D–3                          
  4. D
    D–4
Question 36Single Answer
The centre-line velocity in a pipe flow is 2m/s. What is the average flow velocity in the pipe if the Reynolds number of the flow is 800?
  1. A
    2 m/s                       
  2. B
    1.5 m/s
  3. C
    1 m/s                      
  4. D
    0.5 m/s
Question 37Single Answer
During a constant pressure expansion of a gas, 33.3% heat is converted into work while the temperature rises by 20 K. The specific heat of the gas at constant pressure as a proportion of work, W is
  1. A
    8%                          
  2. B
    10%
  3. C
    12%                        
  4. D
    15%
Question 38Single Answer
A system of 100 kg mass undergoes a process in which its specific entropy increases from 0.3 kJ/kg K to 0.4 kJ/kg K. At the same time, the entropy of the surroundings decreases from 80 kJ/kg K to 75 kJ/kg K. The process is
  1. A
    reversible and isothermal
  2. B
    irreversible
  3. C
    reversible only
  4. D
    isothermal only
Question 39Single Answer
A reversible heat engine rejects 80% of the heat supplied during a cycle of operation. If the engine is reversed and operates as a refrigerator, then its coefficient of performance shall be
  1. A
    6                             
  2. B
    5
  3. C
    4                             
  4. D
    3
Question 40Single Answer
For the same efficiency of the Brayton cycle and the Carnot cycle working between temperature limits of Tmax and Tmin, the power contribution of the Brayton cycle will be
  1. A
    zero            
  2. B
    maximum
  3. C
    minimum
  4. D
    50% of the Carnot cycle
Question 41Single Answer
A fin will be more effective when Bio number is
  1. A
    Greater than 1
  2. B
    Equal to 1
  3. C
    Between 1 and 3
                   4        4
  4. D
    Less than 1
Question 42Single Answer
A tank of length, breadth and height in the ratio of 2:1:2 is full of water. The ratio of hydrostatic force at the bottom to that at any larger vertical surface is
  1. A
    1
  2. B
    2
  3. C
    3
  4. D
    4
Question 43Single Answer
Which of the following fluids exhibit a certain shear stress at zero shear strain rate followed by a straight line relationship between shear stress and shear strain rate?
  1. A
    Newtonian fluid 
  2. B
    Ideal Bingham plastic fluids
  3. C
    Pseudo-plastic fluids
  4. D
    Dilatent fluids
Question 44Single Answer
What is the specific gravity of a marble stone, which weighs 400N in air, and 200N in water? (g=10m/s2)
  1. A
    8
  2. B
    6
  3. C
    4
  4. D
    2
Question 45Single Answer
What is the intensity of pressure in the following SI units, when specific gravity of mercury is 13.6 and the intensity of pressure is 400KPa ?
  1. A
    0.3 bar or 4.077m of water or 0.29 mm of Hg
  2. B
    4 bar or 5.077m of water or 0.399 mm of Hg
  3. C
    0.3 bar or 5.077m of water or 0.599 mm of Hg
  4. D
    4 bar or 4.077m of water or 0.299 mm of Hg
Question 46Single Answer
Consider the following statements:
1.If a small upward displacement is given to a floating body, it results in the reduction of the buoyant force acting on the body
2.A slight horizontal displacement does not change either the magnitude or the location of the buoyant force 
Which of the above statements is/are correct? 
  1. A
    Both 1 and 2
  2. B
    1 only 
  3. C
    2 only
  4. D
    Neither 1 nor 2 
Question 47Single Answer
State whether following flow field is physically possible? 
  1. A
    Possible for steady, incompressible flow
  2. B
    Possible for unsteady, incompressible flow
  3. C
    Possible for steady, compressible flow 
  4. D
    Not Possible 
Question 48Single Answer
In a differential manometer, a head of 0.5 m of fluid A in limb 1 is found to balance a head of 0.3 m of fluid B in limb 2. The atmospheric pressure is 760 mm of mercury. The ratio of specific gravities of A to B is
  1. A
    0.25
  2. B
    0.26
  3. C
    2
  4. D
    4
Question 49Single Answer
A Reversed Carnot Engine removes 50 kW from a heat sink. The temperature of the heat sink is 250 K and the temperature of the heat reservoir is 300 K. The power required of the engine is
  1. A
    10 kW 
  2. B
    20 kW
  3. C
    30 kW
  4. D
    50 kW
Question 50Single Answer
On which of the following just in time manufacturing philosophy emphasizes ?
  1. A
    man power
  2. B
    profit
  3. C
    inventory
  4. D
    manufacturing
Important Questions Package

WBPDCL Assistant Manager Mechanical Exam Online Question Bank Package

Buy WBPDCL Assistant Manager Mechanical Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in WBPDCL Assistant Manager Mechanical question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.WBPDCL Assistant Manager Mechanical Exam - English
Description : 1000 Question with Answer.
₹101 [₹500]
2.WBPDCL Assistant Manager Mechanical Exam - English
Description : 2000 Question with Answer.
₹151 [₹500]
3.WBPDCL Assistant Manager Mechanical Exam - English
Description : 3000 Question with Answer.
₹181 [₹500]
4.WBPDCL Assistant Manager Mechanical Exam - English
Description : 4000 Question with Answer.
₹201 [₹500]
5.WBPDCL Assistant Manager Mechanical Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
6.WBPDCL Assistant Manager Mechanical Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam
Question for WBPDCL Assistant Manager (Mechanical) 2026 - Quiz / Questions / MCQ - Toppersexam