Kurukshetra a journal on rural development is published by
A
Ministry of Finance
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 3Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 4Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
1. a large number of farmers are illiterate and know little about scientific agriculture
2. prices of primary products are lower than those of manufactured products
3. Investments in agriculture has been low when compared to investment in industry
A
1 and 3
B
2 and 3
C
1 and 2
D
1,2 and 3
Question 5Single Answer
Which of the following programmes aims at the promotion of savings among rural women
A
Rashtriya Mahila Kosh
B
Indira Mahila Yojna
C
Jawahar Rozgar Yojna
D
Mahila Samridhi Yojna
Question 6Single Answer
What is Net National Product
A
the money value of final goods and services produced annually in the economy
B
the money value of annual service generation in the economy
C
the money value of tangible goods produced annually in the economy
D
The money value of tangible goods available in the economy
Question 7Single Answer
National income is the
A
net national product at market price
B
net national product at factor cost
C
net domestic product at market price
D
net domestic product at factor cost
Question 8Single Answer
Chelliah Committee of 1992 deals with the overhauling of our
A
financial system
B
tax system
C
patents and copyrights
D
Public sector undertakings
Question 9Single Answer
During which Five Year Plan was the annual growth rate of National Income the lowest
A
2nd plan
B
3rd plan
C
5th plan
D
6th plan
Question 10Single Answer
Which of the following taxes is a progressive tax
A
sales tax
B
custom tax
C
excise tax
D
income tax
Question 11Single Answer
Which of the following estimates the National Income in India
A
National Income Committee
B
Planning Commission
C
Reserve Bank Of India
D
Central Statistical Organisation
Question 12Single Answer
India changed over to the decimal system, coinage in
A
April 1951
B
April 1955
C
April 1957
D
April 1978
Question 13Single Answer
11th Five Year Plan aim at achieving 10% rural tele density in India from the present 1.9% by the year
A
2008
B
2009
C
2010
D
2012
Question 14Single Answer
Which one of the following statements Monitorable Socio Economic Target of the 11th Five Year Plan under the head Environment is not correct
A
treat urban waste water by 2011-12
B
Increase energy efficiency by 20% points by 2016-17
C
attain WHO standards of air quality in all major cities by 2011-12
D
increase forest and tree cover by 15% points
Question 15Single Answer
Who is the ex-officio chairman of Planning commission and National Development Council
A
President
B
Prime Minister
C
Finance Minister
D
Commerce Minister
Question 16Single Answer
Persons below the poverty line in Indian are classified as such based on wheather
A
they belong to agriculture labourer household and the scheduled caste/trive social group
B
they get work for a prescribed minimum number of days in a year
C
they are entitled to a minimum prescribed food basket
D
their daily waged fall below the prescribed minimum wages
Question 17Single Answer
Which of the following Committee’s recommendations are being followed for estimating proverty line in India
A
Dutt committee
B
Lakdawala committee
C
Cheliah Committee
D
Chakravorty Committee
Question 18Single Answer
In which year India adopeted liberal and free market principles
A
1975
B
1981
C
1991
D
2000
Question 19Single Answer
Consider the following statements
1. There is persistent investment over time only in select locals
2. some areas are agro climatically less conductive to development
3. some areas continue to face little or no agrarian transformation and the consequent lack of social and
4. some areas have faced continous political instability
Which of the above statements are correct
A
1,2 and 3
B
1,2 and 4
C
1,3 and 4
D
2,3 and 4
Question 20Single Answer
When was first human development report of India issued
A
April 2001
B
March 2000
C
June 2002
D
April 2002
Question 21Single Answer
How many censuses have been carried out since independence
A
5
B
6
C
7
D
8
Question 22Single Answer
For which year the latest census is being conducted in India
A
2001
B
2010
C
2012
D
2011
Question 23Single Answer
Which of the following are the features of 12th Five Year Plan -
1. Average growth target has been set up 8.2%
2. Areas of main thrust are infrastructure, health and education
3. it seeks to achieve 4% agriculture sector growth during five year period
A
1 only
B
1 and 2
C
1 and 3
D
1,2, and 3
Question 24Single Answer
The period of 12th Five Year Plan
A
2007-12
B
2008-13
C
2010-15
D
2012-17
Question 25Single Answer
A closed economy is an economy in which
A
the money supply is fully controlled
B
deficit financing takes place
C
only exports take place
D
neither exports nor imports take place
Question 26Single Answer
Which country is the highest contributor of per capita greenhouse gas emissions ?
A
China
B
USA
C
Russia
D
India
Question 27Single Answer
Which institution released the ‘Commodity Markets Outlook report for October 2022’ ?
A
International Monetary Fund
B
World Bank
C
World Economic Forum
D
Reserve Bank of India
Question 28Single Answer
‘Garuda VII’ is a bilateral exercise conducted by the Air Force of India and which country ?
A
Sri Lanka
B
France
C
Japan
D
Australia
Question 29Single Answer
Which city is the host of the ‘India Space Congress, ISC 2022’ ?
A
Bengaluru
B
Mumbai
C
New Delhi
D
Hyderabad
Question 30Single Answer
Which country co-chaired the High-Level Dialogue on Migration and Mobility (HLDMM), with the European Union ?
A
India
B
Australia
C
France
D
China
Question 31Single Answer
Who has been appointed as the Chair of India’s Civil 20 (C20), an official engagement group of the G20, in October 2022 ?
A
Mata Amritanandamayi Devi
B
Sadhguru Jaggi Vasudev
C
PM Narendra Modi
D
Baba Ramdev
Question 32Single Answer
India defeated Australia to win the Sultan of Johor Cup 2022 Hockey Tournament. The Final was held in ………..
A
Bangladesh
B
Oman
C
Egypt
D
Malaysia
Question 33Single Answer
Poland has chosen the US Firm, Westinghouse, to build its first nuclear power plant. What is the Capital of Poland ?
A
Warsaw
B
Hamburg
C
Munich
D
Lublin
Question 34Single Answer
NSDC International (NSDCI) and Perdaman have partnered to create an interface between Indian skilled youth and market opportunities in which country ?
A
Australia
B
Japan
C
South Korea
D
New Zealand
Question 35Single Answer
Tata Steel has received Responsible Steel Certification for three of its production facilities in ………
A
Kalinganagar
B
Koraput
C
Jharia
D
Jamshedpur
General English
Question 36Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
He was in the temper
B
and refused
C
discuss the matter again
D
No error
Question 37Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
A flower makes no garland
B
so we must do a thing together
C
in a unit for a good result
D
No error
Question 38Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
My friend is a software engineer
B
and his wife is doctor
C
so they don’t have enough time for each other
D
No error
Question 39Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I don’t have much time that
B
I hear you in detail with verbosity
C
tell everything in nutshell
D
No error
Question 40Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The atmosphere is changing
B
so I have severe pain in my body
C
if you have any painkiller, please give it to me
D
No error
Question 41Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
No one is without fault
B
because no one is God
C
and only God is fault free
D
No error
Question 42Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Your
B
clock is
C
one hour fast
D
No error
Question 43Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The lose of jobs
B
is regarded by some as an necessary evil
C
in the fight against infliation
D
No error
Question 44Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
In science, the credit goes to a man
B
who convinces the world
C
not to the man to whom the idea first occurs
D
No error
Question 45Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
It is only after
B
the match is over
C
that people realize how exciting it is
D
No error
Question 46Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Off the two
B
sisters, she
C
is better
D
No error
Question 47Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
A interesting book
B
‘A Tale of two cities’
C
was written by Alexander Dumas
D
No error
Question 48Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I shall never
B
forget a good
C
deed you did to me, when I was in crisis
D
No error
Question 49Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Wisdom of Vikramaditya
B
solved many riddles
C
that people brought to him for solution
D
No error
Question 50Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
News you broke to his wife
B
made her nervous
C
and she broke down
D
No error
Important Questions Package
Indian Army Graduate Engineer Exam Online Question Bank Package
Buy Indian Army Graduate Engineer Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in Indian Army Graduate Engineer question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
Indian Army Graduate Engineer (Civil) Exam - English
Description : 2000 Question with Answer.
₹231[₹500]
2.
Indian Army Graduate Engineer (Civil) Exam - Hindi
Description : 2000 Question with Answer.
₹231[₹500]
3.
Indian Army Graduate Engineer (Mechanical) Exam - English
Description : 2000 Question with Answer.
₹231[₹500]
4.
Indian Army Graduate Engineer (Mechanical) Exam - Hindi
Description : 2000 Question with Answer.
₹231[₹500]
General English
Question 51Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I have a work
B
to do and
C
so I will reach late
D
No error
Question 52Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
I saw portion
B
of the manuscript
C
on birds
D
No error
Question 53Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Talent without experience is waste
B
so one must attain some practical knowledge and
C
it is only practical knowledge through which one can be an expert
D
No error
Question 54Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The Geeta, the Bible and the Quran all show us
B
the true path of humanity
C
Ramayana also can be included in this group
D
No error
Question 55Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Gandhiji was born on 2nd October 1869
B
He devoted two thirds of his life
C
for Indian freedom movement
D
No error
Question 56Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The students who want to speak in English
B
must read Hindu newspaper
C
in their initial stage
D
No error
Question 57Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Garib rath is a facility by railway ministry
B
for the poor to enjoy express train and facilities
C
but is mostly utilized by the upper class
D
No error
Question 58Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
It is
B
a quarter to ten
C
by my watch
D
No error
Question 59Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Mr. Thakur lived
B
in the three-hundred year
C
old house
D
in Patna
Question 60Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The uncle of mine who is farmer
B
gave me a piece of useful advice
C
when I went to see him three weeks ago
D
No error
Question 61Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
My neighbor along with his children
B
is going tonight to see a Taj Mahal
C
At Agra
D
No error
Question 62Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
Kabir an Rahim are great poets
B
but the former is
C
greater than latter
D
No error
Question 63Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
He has abandoned
B
the criminal activities
C
after returning from jail
D
No error
Question 64Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
We must have
B
sympathy for
C
needy and the poor
D
No error
Question 65Single Answer
Read sentence to find out whether there is any grammatical error in it. The sentences are In three separate parts and each one is labelled (a), (b), (c) and (d). In that case, letter (d) will signify a ‘No error’ response.
A
The Chinese is a very
B
difficult language to understand for those
C
who have never been to China
D
No error
Mathematics
Question 66Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 67Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 68Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 69Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 70Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 71Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 72Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 73Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 74Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 75Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Question 76Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 77Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 78Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 79Single Answer
Convert 0.0909… into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 80Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Question 81Single Answer
Which is smaller ?
A
9/11
B
7/9
C
Equal
D
Cannot compare
Question 82Single Answer
Convert 0.5777… into fraction ?
A
26/45
B
52/90
C
13/22
D
5/9
Question 83Single Answer
Convert 0.81 into fraction ?
A
81/100
B
9/10
C
8/9
D
9/11
Question 84Single Answer
(63)2 – (12)2 =?
A
3528
B
3852
C
3582
D
3825
Question 85Single Answer
Which is greater ?
A
13/17
B
11/14
C
Equal
D
Cannot compare
Question 86Single Answer
16.928 + 24.7582 5.015 =?
A
20
B
24
C
22
D
26
Question 87Single Answer
Convert 0.75 into fraction ?
A
3/4
B
2/3
C
4/5
D
5/8
Question 88Single Answer
Which is greater ?
A
11/13
B
12/15
C
Equal
D
Cannot compare
Question 89Single Answer
Two numbers are co-prime if their HCF is ?
A
0
B
1
C
Same
D
Prime
Question 90Single Answer
Product of all factors of 10 is ?
A
10
B
100
C
1000
D
10000
Question 91Single Answer
How many real numbers exist between 2 and 3 ?
A
1
B
10
C
Infinite
D
None
Question 92Single Answer
Which number is divisible by 11 ?
A
12345
B
1331
C
1234
D
1213
Question 93Single Answer
What is the unit digit of (7^{245}) ?
A
1
B
3
C
7
D
9
Question 94Single Answer
What is (64^{2/3}) ?
A
4
B
8
C
16
D
32
Question 95Single Answer
What is (125^{1/3}) ?
A
3
B
4
C
5
D
6
Question 96Single Answer
Which of the following is composite ?
A
17
B
19
C
21
D
23
Question 97Single Answer
What is √0.0009 ?
A
0.003
B
0.03
C
0.3
D
0.09
Question 98Single Answer
What is √1156 ?
A
32
B
34
C
36
D
38
Question 99Single Answer
What is √2025 ?
A
35
B
40
C
45
D
50
Civil
Question 100Single Answer
Consider the following statements :
1. There will be no defects in select grade timbers.
2. The codal values for strength of grade-II timer without defects may be reduced by 37.5%.
3. For timber used as columns, the permissible stress in ungraded timbers is adopted with a multiplying factor of 0.50.
4. In case of wind force and earthquakes, a modification factor of 1.33 is adopted. Which of the above statements are correct ?
A
1 and 3 only
B
1 and 4 only
C
2 and 4 only
D
2 and 3 only
Question 101Single Answer
Consider the following statements regarding timber :
1. The strength of timber increases by Kiln seasoning.
2. Cutting of wood is to be done prior to treatment.
3. Water seasoning is good for prevention of warping.
4. ASCU treatment enhances the strength of wood. Which of the above statements are correct ?
A
1, 2 and 3 only
B
2, 3 and 4 only
C
1, 3 and 4 only
D
1, 2, 3 and 4
Question 102Single Answer
Gase(s) emitted during rotting or decomposition of timber is /are mainly
A
Methane and Hydrogen
B
Hydrogen Sulphide
C
Carbonic acid and Hydrogen
D
Ammonia
Question 103Single Answer
Efflorescence of bricks is due to
A
Excessive burning of bricks
B
High silt content in brick clay
C
High porosity of bricks
D
Soluble salts present in parent clay
Question 104Single Answer
Disintegration of bricks masonry walls is primarily due to
1. Efflorescence
2. Magnesium sulphate in brick
3. Calcined clay admixtures
4. Kankar nodules
Which of the a above statements are correct ?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 105Single Answer
Consider the following test :
1. Transverse strength test
2. Water absorption test
3. Impact test
4. Breaking strength test
Which of the above are relevant to testing of tiles ?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 106Single Answer
Which of the following statements is/are correct regarding the strength of cement ?
1. Particle sizes less than 3 m increases the viscous nature of the cement.
2. Finer particles in cement can be replaced by fly-ash to improve the strength.
A
1 only
B
2 only
C
Both 1 and 2
D
Neither 1 nor 2
Question 107Single Answer
The constituent compound in Portland cement which reacts immediately with water, and also sets earliest, is
A
Tricalcium silicate
B
Dicalcium silicate
C
Tricalcium aluminate
D
Tetracalcium aluminoferrite
Question 108Single Answer
Which of the following statements are correct with regard to cement mortar ?
1. Workability of cement mortar can be improved by addition of lime.
2. Fly-ash cement is economical in plastering jobs.
3. Addition of saw dust improves workability.
4. Sand in mortar can be replaced by finely crushed fire bricks.
A
1, 2, 3 and 4
B
1, 2 and 3 only
C
3 and 4 only
D
1, 2 and 4 only
Question 109Single Answer
In a concrete mix of proportion 1 : 3 : 6, the actual quantity of sand, which is judged to have undergone 15% bulking, per unit volume of cement, will be
A
3.00
B
3.45
C
4.50
D
6.00
Question 110Single Answer
Which method of curing of concrete is recommendable for rapid gain of strength of concrete ?
A
Sprinkling water
B
Membrane curing
C
High-pressure steam curing
D
Infrared radiation curing
Question 111Single Answer
Which of the following is appropriate as simple field method for assesing consistency of concrete ?
A
Compacting factor
B
Slump test
C
Vee-Bee test
D
Kelly Ball test
Question 112Single Answer
Which of the following are relatable to Autoclaved Aerated Concrete ?
1. Light weight
2. Strong
3 Inorganic
4. Nontoxic
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 113Single Answer
The workability of concrete becomes more reliable depending on
1. Aggregate-cement ratio
2. Time of transit
3. Grading of the aggregate
A
1 only
B
2 only
C
3 only
D
1, 2 and 3
Question 114Single Answer
Which of the following statements are correct for stresses acting on mutually perpendicular faces of a plane element ?
1. The sum of the normal stresses in mutually perpendicular planes is equal to the sum of the principal stresses.
2. The shearing stresses in two mutually perpendicular planes are equal in magnitude and direction.
3. Maximum shear stress is half of the difference between principal stresses.
A
1, 2 and 3 only
B
1 and 2 only
C
2 and 3 only
D
1 and 3 only
Question 115Single Answer
Which of the following statements are correct?
1. Strain in the direction of applied stress is known as longitudinal strain.
2. Tensile stress results in tensile strain in linear and lateral directions.
3. Strains in all directions perpendicular to the applied stress are known as lateral strain. 4. Ratio of change in volume to original volume is known as volumetric strain.
A
1, 2 and 3 only
B
1, 3 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 116Single Answer
In the cross-section of a timber, cambium layer can occur in
A
Inner Bark and Sap Wood
B
Pith and Heart Wood
C
Sap Wood and Heart Wood
D
Outer Bark and Sap Wood
Question 117Single Answer
Consider the following statements :
1. In the infinitesimal strain theory, dilatation is taken as an invariant.
2. Dilatation is not proportional to the algebraic sum of all normal stresses.
3. The shearing modulus is always less than the elastic modulus.
Which of the above statements is/are correct ?
A
1 only
B
1 and 2 only
C
2 only
D
1, 2 and 3
Question 118Single Answer
Which one of the following represents constitutive relationship ?
A
Vertical displacements in a structure
B
Rotational displacements in a structure
C
System of forces in equilibrium
D
Stress-strain behavior of a material
Question 119Single Answer
Principal stresses at a point are 80 N/mm2 and 40 N/mm2, both tensile. The yield stress in simple tension for this material is 200 N/mm2. The values of factors of safety according to maximum principal stress theory and maximum shear stress theory, respectively, are
A
2.5 and 2.5
B
2.5 and 5
C
5 and 1.67
D
6 and 2.50
Question 120Single Answer
The principal stresses at a point are 2 (tensile) and (compressive), and the stress at elastic limit for the material in simple tension is 210 N/mm2. According to maximum shear strain theory, the value of at failure is
A
70 N/mm2
B
105 N/mm2
C
140 N/mm2
D
210 N/mm2
Question 121Single Answer
Which of the following statements are correct ?
1. Cranes are employable in moving and/or hoisting loads.
2. With the use of dipper and stick, power shovels can be used as hoes.
3. Ovedrive for higher speeds is a facility often used comfortably in the working of a tractor.
4. Clam shells are less desirable than draglines if the material is water-saturated.
A
1 and 4 only
B
1 and 2 only
C
2 and 3 only
D
3 and 4 only
Question 122Single Answer
Two similar bars of Steel and Aluminium are heated to a same temperature. Forces are applied at the ends of the bars to maintain their lengths unaltered. If the ratio of Young’s moduli of Steel and Aluminium is 3, and the ratio of the coefficients of thermal expansion of Steel to that of aluminium is 0.5, what is the stress on the Aluminium bar if the stress on the Steel bar is 100 MPa ?
A
16.7 MPa
B
66.7 MPa
C
136.7 MPa
D
150.0 MPa
Question 123Single Answer
A structural steel beam has an unsymmetrical I-cross-section. The overall depth of the beam is 200 mm. The flange stresses at the top and bottom are 120 N/mm2 and 80 N/mm2, respectively. The depth of the natural axis from the top of the beam will be
A
120 mm
B
100 mm
C
80 mm
D
60 mm
Question 124Single Answer
In the analysis of beams subjected to loads, the point with Nil Bending Moment can be a
1. Point of Contraflexure
2. Point of Maximum Shear Force
3. Point of Inflection
Which of the above statements is/are correct ?
A
1 only
B
2 only
C
3 only
D
1, 2 and 3
Question 125Single Answer
A tractor has a permissible loaded speed of 200 m/minute, which can increase by 25% when the load is removed/deposited. Generally, it is operated at 80% of the permissible speed (loaded unloaded). It works at a location where haul distance is 120 m. Rest allowance per round-trip is taken as 50 seconds on an average. Fixed time per trip, for loading and unloading and turnaround, etc., is 30 seconds. What is its effective cycle time?
A
157 seconds
B
161 seconds
C
173 seconds
D
182 seconds
Question 126Single Answer
The purpose of lateral ties in a short RC column is to
A
Avoid buckling of longitudinal bars
B
Facilitate compaction of concrete
C
Increase the load carrying capacity of the column
D
Facilitate construction
Question 127Single Answer
When a two-hinged parabolic arch is subjected to a rise in ambient temperature, the horizontal thrust at the support will
A
Increase
B
Decrease
C
Remain same
D
Increase or decrease depending on the span
Question 128Single Answer
In the slope-deflection equations, deformations are considered to be caused by
A
Shear forces and bending moments only
B
Axial forces, shear forces and bending moments
C
Axial forces and bending moments only
D
Bending moments only
Question 129Single Answer
The maximum bending moment caused by a set of concentrated moving loads is
A
Always at the midpoint of span
B
Between the midpoint and concentrated load next to the midpoint of the span
C
Not definable
D
Always under a load close to the centroid of the set of loads
Question 130Single Answer
Force method of analysis of a structure is particularly preferred when
1. The degrees of freedom of the structure become large
2. The structure has less number of static, and more number of kinematic, indeterminacies
3. The structure has more numbers of static, and less numbers of kinematic, indeterminacies
A
1 only
B
2 only
C
3 only
D
1, 2 and 3
Question 131Single Answer
Stiffness matrix method is the category of
1. Compatibility method
2. Displacement method
3. Force method
4. Equilibrium method
A
1 and 3 only
B
1 and 4 only
C
2 and 3 only
D
2 and 4 only
Question 132Single Answer
Muller-Breslau Principal for obtaining influence lines is applicable to
1. Statically determinate beams and frame
2. Statically indeterminate structures, the material of which is elastic, and follows Hooke’s law.
3. Any statically indeterminate structure
A
1 and 2 only
B
1 only
C
2 only
D
1 and 3 only
Question 133Single Answer
The plastic neutral axis
1. Divides the given section into two equal halves
2. Divides the given section into two unequal parts
3. Lies on the centroidal axis of the section
A
1 only
B
2 only
C
3 only
D
2 and 3 only
Question 134Single Answer
The plastic moment capacity MP is
A
Less than the yield moment
B
Equal to the yield moment
C
Greater than the yield moment
D
Dependent on section dimensions
Question 135Single Answer
Web crippling is caused by
A
Excessive bending moment
B
Failure of web under point loads
C
Width of flanges
D
Column action of web
Question 136Single Answer
The block shear failure of a bolted joint in tension occurs because of
1. Use of higher shear strength bolts
2. Use of paltes with higher bearing strength
A
1 only
B
2 only
C
Both 1 and 2
D
Neithter 1 nor 2
Question 137Single Answer
As per IS code, the maximum longitudinal pitch allowed in bolted joints of tension members is nominally
A
12 times the thickness of the plate
B
12 times the diameter of the bolt
C
16 times the thickness of the plate
D
16 times the diameter of the bolt
Question 138Single Answer
ISMB 100 (rx = 40 mm, ry = 10 mm) has been used as a column in a industrial shed. Along the minor axis, the the column has restraints in the form of purlins at 1.0 m intervals. Effective length factor along major and minor axes are 1.2 and 1.0, respectively. If the slenderness ratio is restricted to 120, the maximum column height will be
A
1.0 m
B
2.4 m
C
4.0 m
D
4.8 m
Question 139Single Answer
As per IS 800 – 2007, the permitted slenderness ratio for a bracing member in case of hangers shall be
A
140
B
145
C
150
D
160
Question 140Single Answer
A rectangular beam of depth d is under bending. Load has been gradually increased when the top fibre has obtained five times the strain at the first yield. What depth of the beam will still respond by elastic conditions?
A
0.16 d
B
0.20 d
C
0.25 d
D
0.40
Question 141Single Answer
The ultimate moment capacity of a mild steel section is usually
A
Equal to the plastic moment capacity
B
More than the yield moment capacity
C
Let than the yield moment capacity
D
More than the plastic moment capacity
Question 142Single Answer
The portal bracing in a truss-bridge is used to
A
Transfer load from top of end posts to bearings
B
Maintain the rectangular shape of the bridge cross-section
C
Stiffen the structure laterally
D
Prevent the buckling of top chord under side sway
Question 143Single Answer
Consider the following cases in the design of reinforced concrete members in flexure:
1. Over-reinforced section
2. Tension failure
3. Compression failure
4. Under-reinforced section
Which of the above cases are considered for safe design of R.C members in flexure?
A
1 and 2 only
B
2 and 4 only
C
3 and 4 only
D
1 and 3 only
Question 144Single Answer
The bond between steel and concrete is mainly due to
1. Mechanical resistance
2. Pure adhesive resistance
3. Frictional resistance
A
1 and 2 only
B
1 and 3 only
C
2 and 3 only
D
1, 2 and 3
Question 145Single Answer
The carbonation process is demonstrated more by
A
Atmospheric corrosion
B
Chloride corrosion
C
Stress corrosion
D
Hydrogen embrittlement
Question 146Single Answer
When a sprially reinforced short column is loaded axially, the concrete inside the core is subjected to
A
Bending and compression
B
Biaxial compression
C
Triaxial compression
D
Uniaxial compression
Question 147Single Answer
In a reinforced concrete section, shear stress distribution is diagrammatically
A
Wholly Parabolic
B
Wholly Rectangular
C
Parabolic above NA and Rectangular below NA
D
Rectangular above NA and Parabolic below NA
Question 148Single Answer
As per IS 456 – 2000, the maximum permissible shear stress, TCmax' is based on
A
Diagonal tension failure
B
Diagonal compression failure
C
Flexural tension failure
D
Flexural compression failure
Question 149Single Answer
Footings shall be designed to sustain the
1. Applied loads
2. Moments and forces under relatable loading conditions
3. Induced reactions