Latest GSSSB Supervisor Instructor Mechanical Exam Question (Objective Questions), MCQ in English
Subjects : Reasoning & Data Interpretation, Quantitative Aptitude, Constitution of India, Current Affairs, Comprehension (Gujarati & English), Technical Subject (Mechanical)
Question Bank GSSSB Supervisor Instructor (Mechanical) Exam - English
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 2Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 3Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 4Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 5Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 6Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 7Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 8Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 9Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 10Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’ and if no such word can be formed your answer is ‘B’.
A
V
B
T
C
E
D
A
E
B
Question 11Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
A
X
B
W
C
I
D
H
Question 12Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
A
SUM
B
BIG
C
Both BIG and THE
D
FOR
E
Both FOR and BIG
Question 13Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be second from the right ?
A
AND
B
FOR
C
THE
D
BIG
E
SUM
Question 14Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If second alphabet in each of the words is changed to next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed ?
A
None
B
One
C
Two
D
Three
E
Four
Question 15Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
How many letters are there in the English alphabetical series between the second letter of the word which is second from the right and the second letter of the word which is second from the left of the given words?
A
Two
B
Five
C
Six
D
Nine
E
Three
Question 16Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If in each of the given words, each of the consonant is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will no vowels appear?
A
None
B
One
C
Two
D
Three
E
More than three
Question 17Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the third alphabet in each of the words is changed to the next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed?
A
None
B
One
C
Two
D
Three
E
Four
Question 18Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the position of the first and the second alphabets of each of the words are interchanged, which of the following will form a meaningful English word?
A
Both CAT and OWN
B
Both BRU and INK
C
Only CAT
D
Only INK
E
Only LEG
Question 19Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be exactly in the middle of the five words?
A
OWN
B
LEG
C
BRU
D
CAT
E
INK
Question 20Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If in each of the given words, each of the consonants is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will the same alphabet appear twice?
A
None
B
One
C
Two
D
Three
E
More than three
Question 21Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
How many employees of bank ‘X’ opted for VRS ?
(I) 18% of the 950 officer cadre employees and 6% of the 1100 of all other cadre employees opted for VRS. (II) 28% of the employees in the age group of 51 to 56 and 17% of the employees in all other age groups opted for VRS.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 22Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
The area of a playground is 1600 square meters. What is its perimeter ?
(I) It is a perfect square playground
(II) It costs Rs.3200 to put a fence around the playground at the rate of Rs.20 per meter.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 23Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What is the value of m – n ÷ 37 ?
(I) m is the largest possible six-digit number and n is the smallest possible six-digit number.
(II) The difference between m and n is known.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 24Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What is the value of x ?
(I) If 10 is added to x, the result is 34.
(II) If x is multiplied by y, the result is 38.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 25Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What was the total compound interest on a sum after three years ?
(I) The interest after one year was Rs. 100 and the sum after was Rs.1000.
(II) The difference between simple and compound interest on a sum of Rs.1000 at the end of two years was Rs.10.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 26Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
Among Japanese Yen, Australian Dollar, Hong Kong Dollar and Singapore Dollar, which currency has the lowest value in terms of Indian rupees ?
(1) One rupee is equal to 2.56 Japanese Yen, 0.338 Australian Dollar, and 0.465 Hong Kong Dollar.
(2) Value of Australian Dollar is equal to Singapore Dollar.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 27Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What is the value of a two-digit number ?
(1) The sum of the two digits is 4.
(2) The difference between the two digits is 2.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 28Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What was the population of State ‘A’ in 1999 ?
(1) Population of the State increases every year by 20% and its population in 1997 was 1,20,000.
(2) Population of State A in 1997 was twice that of State B in the same year.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 29Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What is the speed of the boat in still water ?
(1) It takes 2 hours to cover the distance between A and B downstream.
(2) It takes 4 hours to cover the distance between A and B upstream.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 30Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
How many vinyl squares with sides 5 inches long will be needed to cover the rectangular floor of a room ?
(1) The floor is 5ft long.
(2) The floor is 3 ft wide.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Quantitative Aptitude
Question 31Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 32Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 33Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 34Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 35Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 36Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 37Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 38Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 39Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 40Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Question 41Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 42Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 43Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 44Single Answer
Convert 0.0909… into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 45Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Question 46Single Answer
Passage :
information given below and answer the question that follow.
The result of an exam is given below. Out of 1000 students who appeared
(i) 658 failed in Physics
(ii) 166 failed in Physics and Chemistry
(iii) 372 failed in Chemistry, 434 failed in Physics and Maths
(iv) 590 failed in Maths, 126 failed in Maths & Chemistry
Find the number of people who failed in (assuming that none is passed in all subjects.
We have the following equations:
a+ b + c + d + e + f + g = 1000
a + b + d + e = 658, b + d = 166
b + d + c + f = 372
d + e = 434 as in the figure.
d + e + f + g = 590, d + f = 126. Find the values
Chemistry but not in Physics.
A
318
B
198
C
213
D
206
Question 47Single Answer
Passage :
Direction: information given below and answer the question that follow.
The result of an exam is given below. Out of 1000 students who appeared
(i) 658 failed in Physics
(ii) 166 failed in Physics and Chemistry
(iii) 372 failed in Chemistry, 434 failed in Physics and Maths
(iv) 590 failed in Maths, 126 failed in Maths & Chemistry
Find the number of people who failed in (assuming that none is passed in all subjects.
We have the following equations:
a+ b + c + d + e + f + g = 1000
a + b + d + e = 658, b + d = 166
b + d + c + f = 372
d + e = 434 as in the figure.
d + e + f + g = 590, d + f = 126. Find the values
Physics or Maths but not in Chemistry.
A
558
B
718
C
628
D
None of these
Question 48Single Answer
Passage :
For the next four question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read all the three papers ?
A
20%
B
25%
C
30%
D
40%
Question 49Single Answer
Passage :
For the next four : question that follow :
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only two papers?
A
19%
B
31%
C
44%
D
None of these
Question 50Single Answer
Passage :
For the next four : question that follow :
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only one paper ?
A
38%
B
48%
C
51%
D
None of these
Important Questions Package
GSSSB Supervisor Instructor Mechanical Exam Online Question Bank Package
Buy GSSSB Supervisor Instructor Mechanical Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GSSSB Supervisor Instructor Mechanical question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
GSSSB Supervisor Instructor (Mechanical) Exam - English
Description : 1000 Question with Answer
₹101[₹500]
2.
GSSSB Supervisor Instructor (Mechanical) Exam - English
Description : 2000 Question with Answer
₹151[₹500]
3.
GSSSB Supervisor Instructor (Mechanical) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
4.
GSSSB Supervisor Instructor (Mechanical) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
Quantitative Aptitude
Question 51Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only A but neither B nor C ?
A
4%
B
3%
C
1%
D
None of these
Question 52Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
If A and B are any two sets, then what is A ᴖ (A ᴗ B) equal to ?
A
Complement of A
B
Complement of B
C
B
D
A
Question 53Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
40% of the people read newspaper X, 50% read newspaper Y and 10% read both the papers. What percentage of the people read neither newspaper ?
A
10%
B
15%
C
20%
D
25%
Question 54Single Answer
Passage :
Read the passage below and solve the question based on it.
5% of the passengers do not like coffee, tea and lassi and 10% like all the three, 20% like coffee and tea, 25% like lassi and coffee and 25% like lassi and tea. 55% like coffee, 50% like tea, and 50% like lassi.
Where C = Coffee, T = Tea and L =Lassi
The passengers who like only coffee is greater than the passengers who like only lassi by
A
25%
B
100%
C
75%
D
0%
Question 55Single Answer
Passage :
Read the passage below and solve the question based on it.
5% of the passengers do not like coffee, tea and lassi and 10% like all the three, 20% like coffee and tea, 25% like lassi and coffee and 25% like lassi and tea. 55% like coffee, 50% like tea, and 50% like lassi.
Where C = Coffee, T = Tea and L =Lassi
The percentage of passengers who like both tea and lassi but not coffee, is
A
15
B
25
C
40
D
75
Question 56Single Answer
Passage :
Read the passage below and solve the question based on it.
5% of the passengers do not like coffee, tea and lassi and 10% like all the three, 20% like coffee and tea, 25% like lassi and coffee and 25% like lassi and tea. 55% like coffee, 50% like tea, and 50% like lassi.
Where C = Coffee, T = Tea and L =Lassi
The percentage passengers who like at least 2 of the coffee, tea and lassi, is
A
30
B
45
C
50
D
60
Question 57Single Answer
Passage :
Read the passage below and solve the question based on it.
5% of the passengers do not like coffee, tea and lassi and 10% like all the three, 20% like coffee and tea, 25% like lassi and coffee and 25% like lassi and tea. 55% like coffee, 50% like tea, and 50% like lassi.
Where C = Coffee, T = Tea and L =Lassi
If the number of passengers is 180, then the number of passengers who like lassi only, is
A
10
B
18
C
27
D
36
Question 58Single Answer
Passage :
Read the passage below and solve the question based on it.
5% of the passengers do not like coffee, tea and lassi and 10% like all the three, 20% like coffee and tea, 25% like lassi and coffee and 25% like lassi and tea. 55% like coffee, 50% like tea, and 50% like lassi.
Where C = Coffee, T = Tea and L =Lassi
In a town three newspapers A, B and C are published. 42% of the people in that town read A, 68% read B, 51% read C, 30% read A and B, 28% read B and C, 36% A and C and 18% do not read any paper. Find the % of the population of town that reads all the three.
A
15%
B
25%
C
20%
D
35%
Question 59Single Answer
Passage :
In the adjoining figure, I and II are circles with ceners P and Q respectively. The two circle touch each other and have a common tangent that touches them at points R and S respectively. This common tangent meets the line joining P and Q at O. The diameters of I and II are in the ratio 4 : 3. It is also known that the length of PO is 28 cm.
What is the ratio of the length of PQ to that of QO?
A
1 : 4
B
1 : 3
C
3 : 8
D
3 : 4
Question 60Single Answer
Passage :
A committee of five members is to be formed out of 5 Males, 6 Females and 3 Children. In how many different ways can it be done if ?
The committee should consist of 2 Males, 2 Females and 1 child ?
A
450
B
225
C
55
D
90
Constitution of India
Question 61Single Answer
Which Act gave separate electorate rights to Muslims in India ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1915
C
The Government of India Act, 1919
D
The Government of India Act, 1935
Question 62Single Answer
Which one of the following made the Indian Legislature bicameral ?
A
The Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 63Single Answer
'Diarchy' was established in India by which of the following ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1935
C
The Government of India Act, 1919
D
None of the above
Question 64Single Answer
Which one of the following aimed at providing a federal structure for India ?
A
Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 65Single Answer
As a guardian of the government of India Act, 1935 a Court was constituted which was called.
A
Privy Council
B
Supreme Court
C
High Court
D
Federal Court
Question 66Single Answer
Under the Government of India Act 1935, the Federal court had -
A
Original jurisdiction only
B
Appellate jurisdiction only
C
Advisory jurisdiction only
D
Original, appellate and advisory jurisdiction
Question 67Single Answer
Under the Government of India's Act 1935, how many Governors and Chief Commissioners provinces constituted in British India ?
A
14 and 7
B
11 and 7
C
15 and 9
D
None of the above
Question 68Single Answer
The Mountbaten plan led to the enactment of :
A
Government of India Act, 1919
B
Government of India Act, 1935
C
The Indian Independence Act, 1947
D
None of the above
Question 69Single Answer
The plan of Lord Mountbatten was excepted by the congress and the muslim league. The British Parliament enacted the Indian Independence act, 1947 which got Royal assistant on -
A
3 June, 1947
B
4 July, 1947
C
15 July, 1947
D
18 July, 1947
Question 70Single Answer
Which one of the following relates to transfer of power to the Indians and partition of the country ?
A
Simon Commission
B
Cripps Mission
C
Cabinet Mission Plan
D
The Mountbatten plan
Current Affairs
Question 71Single Answer
What is the name of the new policy launched by Gujarat CM Bhupendra Patel in June 2025 to boost electronics manufacturing?
What is the target investment amount for the Gujarat Electronics Component Manufacturing Policy 2025?
A
Rs.25,000 crore
B
Rs.35,000 crore
C
Rs.45,000 crore
D
Rs.55,000 crore
Question 73Single Answer
How much financial aid is allocated for the Centre of Excellence under the Gujarat Electronics Component Manufacturing Policy 2025?
A
Rs.10 crore
B
Rs.15 crore
C
Rs.12.5 crore
D
Rs.20 crore
Question 74Single Answer
Which country's Supreme Leader, Ali Khamenei, was assassinated in a joint US-Israel strike in late February 2026?
A
Syria
B
Iraq
C
Lebanon
D
Iran
Question 75Single Answer
What was the primary goal stated for the 2026 Israeli–United States strikes on Iran?
A
Nuclear disarmament only
B
Border security
C
Economic sanctions enforcement
D
Regime change in Tehran
Question 76Single Answer
Which Indian state won its maiden Ranji Trophy title recently (reported in early March 2026)?
A
Mumbai
B
Tamil Nadu
C
Jammu & Kashmir
D
Karnataka
Question 77Single Answer
What funding amount did Germany announce for a new climate resilience initiative with India in February 2026?
A
EUR 10 million
B
EUR 100 million
C
EUR 50 million
D
EUR 20 million
Question 78Single Answer
Which Indian state launched its first Dark Sky Park in Kolli Hills in February 2026?
A
Kerala
B
Tamil Nadu
C
Uttarakhand
D
Himachal Pradesh
Question 79Single Answer
Who inaugurated three major inland waterways projects on National Waterway-2 in Assam in February 2026?
A
Nitin Gadkari
B
Jyotiraditya Scindia
C
Narendra Modi
D
Sarbananda Sonowal
Question 80Single Answer
Which event is scheduled for inauguration by PM Narendra Modi in March 2026 in Uttar Pradesh?
A
New Parliament building
B
Noida International Airport
C
Bullet train launch
D
Smart City project
Comprehension (Gujarati & English)
Question 81Single Answer
I go to Madurai by —– Vaigai Express
A
a
B
an
C
some
D
the
Question 82Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 83Single Answer
Passage :
Direction : Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has ……………a centralized online databank system for all statutory government bodies to …………an eye on their assets and liabilities.
A
presented , stay
B
introduced , keep
C
announce , make
D
created , let
E
proclaimed , hold
Question 84Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
A
liabilities
B
responsibilities
C
estates
D
profits
Question 85Single Answer
Passage :
Direction : In the question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Affidavit
A
Affirmation
B
Slander
C
Oath
D
Testimony
Question 86Single Answer
"શાંતિ" શબ્દનો અર્થ શું છે ?
A
વાતચીત
B
આક્રમણ
C
ખેડૂત
D
ધમાધમ
Question 87Single Answer
"વ્યક્તિ" શબ્દનો વિલોમ શબ્દ શું છે ?
A
સંગઠન
B
વ્યવસ્થા
C
સંવિદાન
D
અનવરત
Question 88Single Answer
"વિકાસ" શબ્દનું અર્થ શું છે ?
A
અભિવૃદ્ધિ
B
વિઘટન
C
વિદ્યા
D
આકર્ષણ
Question 89Single Answer
"સ્થાન" શબ્દનું વિરોધી શબ્દ શું છે ?
A
ધૂપ
B
દૂર
C
જગ્યા
D
આવેશ
Question 90Single Answer
"મંજિલ" શબ્દનો વ્યાપારિક અર્થ શું છે ?
A
ગોલ
B
ધબ્બુ
C
સાંજ
D
ઉદ્દેશ
Technical Subject (Mechanical)
Question 91Single Answer
A robot is?
A
A human operator
B
A programmable machine capable of performing tasks automatically
C
A manual tool
D
A mechanical lever
Question 92Single Answer
Industrial robots are mainly used for?
A
Only cutting
B
Welding, material handling, painting, assembly
C
Grinding only
D
Cooling only
Question 93Single Answer
The main components of a robot include?
A
Only controller
B
Only manipulator and motor
C
Only sensors and actuator
D
Manipulator, controller, end-effector, sensors, power supply
Question 94Single Answer
Manipulator in robotics refers to?
A
The sensor unit
B
The robot controller
C
The programming language
D
The robotic arm or structure used to move objects
Question 95Single Answer
End-effector in a robot is?
A
The tool attached to the robot to perform tasks
B
The power supply
C
The controller only
D
The sensor
Question 96Single Answer
Robot degrees of freedom (DOF) indicate?
A
Speed only
B
Power consumption
C
Weight of robot
D
Number of independent movements the robot can make
Question 97Single Answer
Cartesian robot has which type of motion?
A
Spherical motion
B
Rotary only
C
Linear motion along X, Y, Z axes
D
Circular only
Question 98Single Answer
SCARA robot is mainly used for?
A
Assembly and pick-and-place operations
B
Welding only
C
Grinding only
D
Painting only
Question 99Single Answer
Articulated robot has?
A
Rotary joints like human arm
B
Linear motion only
C
Single-axis motion only
D
No joints
Question 100Single Answer
Delta robot is mainly used for?
A
High-speed pick-and-place operations
B
Welding
C
Milling
D
Grinding
Question 101Single Answer
Machining is?
A
Removing material from a workpiece to obtain desired shape
B
Adding material to a workpiece
C
Painting a surface
D
Heating a workpiece
Question 102Single Answer
Metal cutting involves?
A
Welding of material
B
Casting of material
C
Shearing of material using a cutting tool
D
Heating only
Question 103Single Answer
Orthogonal cutting is?
A
Cutting at an angle
B
Cutting where the cutting edge is perpendicular to the cutting velocity
C
Shaping process
D
Forging process
Question 104Single Answer
Oblique cutting is?
A
Milling process
B
Perpendicular cutting
C
Cutting where the cutting edge is at an angle to the cutting velocity
D
Grinding process
Question 105Single Answer
Primary shear zone in metal cutting is?
A
Chip flow area only
B
Zone of heat dissipation only
C
Tool surface only
D
Zone where most of shearing occurs
Question 106Single Answer
Tool flank wear occurs at?
A
Flank of the tool due to rubbing
B
Rake face
C
Workpiece
D
Chip
Question 107Single Answer
Crater wear occurs at?
A
Rake face of the tool
B
Flank
C
Workpiece
D
Coolant
Question 108Single Answer
Machinability is?
A
Ease of cutting a material
B
Hardness of material only
C
Toughness only
D
Strength only
Question 109Single Answer
High speed steel (HSS) tools are used for?
A
Casting only
B
Grinding only
C
General purpose machining
D
Welding only
Question 110Single Answer
Carbide tools are used for?
A
High speed and hard materials machining
B
Soft metals only
C
Wood only
D
Plastic only
Question 111Single Answer
Work study is used to?
A
Improve productivity and efficiency
B
Reduce raw material
C
Reduce machine cost
D
Increase power consumption
Question 112Single Answer
Method study focuses on?
A
Improving the method of doing a job
B
Reducing labor only
C
Reducing machine cost only
D
Reducing material
Question 113Single Answer
Work measurement determines?
A
Standard time for a job
B
Material cost
C
Machine maintenance schedule
D
Quality control
Question 114Single Answer
Techniques of work study include?
A
Method study and work measurement
B
Cost accounting
C
Marketing strategies
D
Inventory only
Question 115Single Answer
Motion study is part of?
A
Inventory control
B
Work measurement
C
Quality control
D
Method study
Question 116Single Answer
Time study uses?
A
Stop watch or time measurement devices
B
Cost accounting software
C
CAD software
D
Statistical tables only
Question 117Single Answer
Standard time includes?
A
Only machine time
B
Only normal time
C
Only rest time
D
Normal time + allowances
Question 118Single Answer
Work sampling is used to?
A
Reduce inventory
B
Measure quality
C
Determine proportion of time spent on activities
D
Measure production cost
Question 119Single Answer
Production planning involves?
A
Only machine maintenance
B
Only hiring labor
C
Only purchasing material
D
Planning of materials, machines, and manpower
Question 120Single Answer
Production control ensures?
A
Quality control only
B
Material reduction only
C
Machine utilization only
D
Production as per schedule
Question 121Single Answer
CAD stands for?
A
Computer Aided Design
B
Computer Assisted Drawing
C
Centralized Automated Design
D
Computer Analysis Design
Question 122Single Answer
CAM stands for?
A
Computer Aided Manufacturing
B
Computer Assisted Machining
C
Central Automated Manufacturing
D
Computer Analysis Machine
Question 123Single Answer
A CAD workstation primarily consists of?
A
Printer only
B
Lathe, milling machine, computer
C
Computer, monitor, input devices, software
D
Scanner only
Question 124Single Answer
Vector graphics in CAD are?
A
Defined by mathematical equations
B
Composed of pixels
C
Raster images only
D
Photographs
Question 125Single Answer
Raster graphics in CAD are?
A
Mathematical curves
B
Composed of pixels
C
Vector only
D
3D models
Question 126Single Answer
Carbon steel contains primarily?
A
Iron and Chromium
B
Iron and Nickel
C
Iron and Copper
D
Iron and Carbon
Question 127Single Answer
Mild steel has carbon content of approximately?
A
2–3%
B
0.6–1%
C
1.5–2%
D
0.15–0.25%
Question 128Single Answer
Cast iron contains carbon in the range of?
A
4–6%
B
0.2–0.5%
C
0.5–1%
D
2–4%
Question 129Single Answer
Stainless steel is resistant to?
A
Wear only
B
Corrosion
C
Heat only
D
Torque
Question 130Single Answer
Alloy steel contains?
A
Additional elements like Cr, Ni, Mo
B
Only carbon
C
Only iron
D
Only copper
Question 131Single Answer
Heat treatment process used to soften steel is?
A
Hardening
B
Quenching
C
Tempering
D
Annealing
Question 132Single Answer
Quenching is used to?
A
Reduce carbon
B
Soften steel
C
Increase hardness
D
Increase ductility
Question 133Single Answer
Tempering is performed after?
A
Rolling
B
Annealing
C
Normalizing
D
Quenching
Question 134Single Answer
Normalizing is performed to?
A
Harden steel
B
Refine grain structure
C
Reduce hardness
D
Weld metal
Question 135Single Answer
Case hardening increases?
A
Ductility
B
Core hardness
C
Surface hardness
D
Toughness only
Question 136Single Answer
The SI unit of length is?
A
Meter
B
Centimeter
C
Inch
D
Foot
Question 137Single Answer
The SI unit of mass is?
A
Gram
B
Kilogram
C
Pound
D
Ton
Question 138Single Answer
Vernier calipers are used to measure?
A
Torque
B
Pressure
C
Temperature
D
Linear dimensions
Question 139Single Answer
Micrometer screw gauge can measure?
A
Flow rate
B
Temperature
C
Pressure
D
Small linear dimensions with high accuracy
Question 140Single Answer
The least count of an instrument is?
A
Average reading
B
Maximum measurement
C
Smallest measurement it can accurately measure
D
Total range
Question 141Single Answer
The instrument used to measure angles accurately is?
A
Micrometer
B
Vernier caliper
C
Sine bar
D
Dial gauge
Question 142Single Answer
Straightness of a surface is measured by?
A
Vernier caliper
B
Micrometer
C
Dial gauge and surface plate
D
Bevel protractor
Question 143Single Answer
Flatness can be checked using?
A
Vernier caliper
B
Surface plate and feeler gauge
C
Micrometer
D
Sine bar
Question 144Single Answer
Squareness is the measure of?
A
Surface roughness
B
Angle between two surfaces
C
Roundness
D
Concentricity
Question 145Single Answer
Perpendicularity tolerance specifies?
A
Flatness
B
Linear dimensions
C
How perpendicular a feature is to a reference
D
Surface roughness
Question 146Single Answer
The first law of thermodynamics is a statement of?
A
Entropy increase
B
Conservation of mass
C
Conservation of energy
D
Heat transfer
Question 147Single Answer
The second law of thermodynamics states?
A
Energy is conserved
B
Entropy of an isolated system never decreases
C
Pressure is constant
D
Work is equal to heat
Question 148Single Answer
In an ideal gas, internal energy depends on?
A
Pressure only
B
Temperature only
C
Volume only
D
Pressure and volume
Question 149Single Answer
The efficiency of a Carnot engine depends on?
A
Mass flow rate
B
Pressure difference
C
Volume difference
D
Temperature difference between heat reservoirs
Question 150Single Answer
The term “isentropic process” means?
A
Constant volume
B
Constant pressure
C
Constant entropy
D
Constant temperature
Question 151Single Answer
A refrigerant absorbs heat in the?
A
Compressor
B
Condenser
C
Evaporator
D
Expansion valve
Question 152Single Answer
The coefficient of performance (COP) of a refrigerator is?
A
QL / W
B
W / QL
C
QH / W
D
W / QH
Question 153Single Answer
In a heat pump, the heat is delivered to?
A
High temperature reservoir
B
Low temperature reservoir
C
Compressor only
D
Evaporator only
Question 154Single Answer
The working fluid of a vapour compression system is called?
A
Steam
B
Water
C
Air
D
Refrigerant
Question 155Single Answer
In fluid statics, pressure at a point is?
A
Dependent on velocity
B
Varies with direction
C
Zero at all points
D
Same in all directions
Question 156Single Answer
Manometers are used to measure?
A
Pressure
B
Flow rate
C
Velocity
D
Temperature
Question 157Single Answer
Pascal’s law is applied in?
A
Pumps
B
Hydraulic systems
C
Compressors
D
Heat exchangers
Question 158Single Answer
Hydrostatic pressure at a depth h in a fluid of density ρ is?
A
ρ g / h
B
ρ g h
C
h / ρ g
D
ρ / g h
Question 159Single Answer
The Bernoulli’s equation is a statement of?
A
Second law of thermodynamics
B
Conservation of mass
C
Conservation of energy for flowing fluids
D
Momentum principle
Question 160Single Answer
The flow of an ideal fluid is?
A
Turbulent
B
Rotational
C
Irrotational
D
Viscous
Question 161Single Answer
Kinematic viscosity is defined as?
A
Velocity / density
B
Density / dynamic viscosity
C
Pressure / velocity
D
Dynamic viscosity / density
Question 162Single Answer
Reynolds number determines?
A
Velocity
B
Pressure
C
Temperature
D
Laminar or turbulent flow
Question 163Single Answer
In laminar flow, the velocity profile is?
A
Parabolic
B
Uniform
C
Linear
D
Sinusoidal
Question 164Single Answer
In turbulent flow, the velocity profile is?
A
Linear
B
Parabolic
C
Flat near the center and steep near the walls
D
Sinusoidal
Question 165Single Answer
The orifice meter measures?
A
Flow rate
B
Pressure
C
Temperature
D
Density
Question 166Single Answer
Solar energy is classified as?
A
Fossil fuel energy
B
Non-renewable energy
C
Conventional energy
D
Renewable energy
Question 167Single Answer
The efficiency of a solar photovoltaic cell depends mainly on?
A
Humidity
B
Wind speed
C
Temperature and irradiance
D
Altitude only
Question 168Single Answer
Wind energy is converted into electricity by?
A
Solar panel
B
Wind turbine
C
Hydro turbine
D
Biomass gasifier
Question 169Single Answer
The energy obtained from flowing water is called?
A
Tidal energy
B
Geothermal energy
C
Solar energy
D
Hydro energy
Question 170Single Answer
Biomass energy is derived from?
A
Organic matter
B
Sunlight
C
Wind
D
Tides
Question 171Single Answer
Geothermal energy comes from?
A
Ocean currents
B
Sunlight
C
Heat from Earth’s interior
D
Wind
Question 172Single Answer
Tidal energy is produced due to?
A
Gravitational forces of moon and sun
B
Wind
C
Solar radiation
D
Earth’s rotation only
Question 173Single Answer
The most abundant renewable energy source on Earth is?
A
Wind energy
B
Solar energy
C
Biomass
D
Geothermal energy
Question 174Single Answer
Photovoltaic effect is the principle of?
A
Wind turbines
B
Solar water heater
C
Solar cells
D
Biomass combustion
Question 175Single Answer
The Betz limit refers to?
A
Biomass conversion efficiency
B
Solar panel efficiency
C
Maximum efficiency of a wind turbine
D
Hydro turbine efficiency
Question 176Single Answer
The fundamental frequency of a simple harmonic motion is inversely proportional to?
A
Stiffness
B
Mass
C
Amplitude
D
Time period
Question 177Single Answer
In a flywheel, the maximum fluctuation of speed occurs at?
A
Neutral axis
B
Minimum energy storage
C
Mean energy
D
Maximum energy storage
Question 178Single Answer
The primary function of a governor is to?
A
Increase power output
B
Regulate engine speed
C
Reduce fuel consumption
D
Balance engine load
Question 179Single Answer
In a belt drive, the velocity ratio depends on?
A
Belt tension
B
Pulley diameters
C
Belt width
D
Pulley material
Question 180Single Answer
Maximum bending stress in a shaft subjected to bending moment M, σ =?
A
M c / I
B
M / I
C
I / M
D
M / Z
Question 181Single Answer
Maximum shear stress in a circular shaft under torque T, τmax =?
A
4 T / π d³
B
32 T / π d³
C
8 T / π d³
D
16 T / π d³
Question 182Single Answer
For a simply supported shaft subjected to torque and bending, the maximum shear stress occurs?
A
At mid-radius
B
At the axis
C
On the surface
D
At neutral axis
Question 183Single Answer
The safe load on a shaft is determined by?
A
Maximum bending stress only
B
Maximum combined stress
C
Maximum torsional stress only
D
Minimum diameter
Question 184Single Answer
In a belt drive, slip occurs due to?
A
Tension
B
Friction
C
Pulley diameter
D
Shaft speed
Question 185Single Answer
The coefficient of friction in a journal bearing depends on?
A
All of the above
B
Bearing material
C
Load
D
Lubricant
Question 186Single Answer
Direct stress is defined as?
A
Force per unit area along axis of body
B
Force per unit length
C
Shear force / Area
D
Moment / Area
Question 187Single Answer
Unit of stress is?
A
N
B
N·m
C
N/m²
D
m²
Question 188Single Answer
Strain is?
A
Force per unit area
B
Deformation per unit length
C
Energy per volume
D
Stress / Area
Question 189Single Answer
Unit of strain is?
A
m
B
N/m²
C
No unit
D
m²
Question 190Single Answer
Young’s modulus is?
A
Force × Area
B
Strain / Stress
C
Stress / Strain
D
Stress × Strain
Question 191Single Answer
Shear stress is defined as?
A
Force × Length
B
Axial force / Area
C
Moment / Area
D
Tangential force / Area
Question 192Single Answer
Poisson’s ratio is?
A
Lateral strain / Longitudinal strain
B
Longitudinal strain / Lateral strain
C
Stress / Strain
D
Shear stress / Shear strain
Question 193Single Answer
Maximum shear stress occurs at?
A
Neutral axis
B
Top fiber
C
Bottom fiber
D
At supports
Question 194Single Answer
For uniform bar, axial deformation ΔL =?
A
FL / AE
B
AE / FL
C
F / AL
D
FL / E
Question 195Single Answer
Unit of modulus of rigidity (G) is?
A
N/m²
B
N·m
C
N
D
Pa·m
Question 196Single Answer
Moment of inertia depends on?
A
Shape and size of cross-section
B
Material
C
Load
D
Length only
Question 197Single Answer
Moment of inertia of rectangular section about centroidal axis, I =?
A
b h² / 6
B
h b³ / 12
C
b h³ / 12
D
b³ h / 12
Question 198Single Answer
Polar moment of inertia of solid circular shaft, J =?
A
π d² / 4
B
π d³ / 16
C
π d⁴ / 32
D
π d⁴ / 64
Question 199Single Answer
Bending moment at a section is?
A
Shear force × distance
B
Sum of moments of forces about that section
C
Load / Area
D
Force × Length
Question 200Single Answer
Shear force at a section is?
A
Moment / Length
B
Algebraic sum of vertical forces to one side
C
Load × Distance
D
None
Question 201Single Answer
Centroid of a uniform triangular lamina is located at?
A
1/2 from base
B
2/3 from base
C
1/3 from base
D
1/4 from base
Question 202Single Answer
Centroid of a uniform semicircular lamina from the flat edge is?
A
R/2
B
4R/3π
C
2R/3
D
R/π
Question 203Single Answer
Centre of gravity of a uniform solid hemisphere is located at?
A
3R/8 from base
B
R/2 from base
C
R/3 from base
D
4R/3π from base
Question 204Single Answer
Coplanar concurrent forces result in?
A
Translation only
B
Rotation only
C
Both translation and rotation
D
Equilibrium only
Question 205Single Answer
Lami’s theorem is applicable to?
A
Two forces
B
Three forces
C
Four forces
D
Any number of forces
Question 206Single Answer
Resultant of two parallel forces acting in opposite directions is?
A
Sum of magnitudes
B
Product of magnitudes
C
Difference of magnitudes
D
Zero always
Question 207Single Answer
If two parallel forces act in the same direction, their resultant is?