Latest GSSSB Municipal Engineer Exam Question (Objective Questions), MCQ in English
Subjects : Reasoning & Data Interpretation, Quantitative Aptitude, Indian Constitution, Current Affairs, Gujarati & English Comprehension, Technical Subject (Civil Engineering)
Question Bank GSSSB Municipal Engineer Exam - English
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 2Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 3Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 4Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 5Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 6Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 7Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 8Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 9Single Answer
Passage :
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z .
Which letter in this alphabet is the eighth letter to the right of the letter and which is tenth letter to the left of the last but one letter of the alphabet ?
A
X
B
W
C
I
D
H
Question 10Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the third alphabet of each of the words is changed to the next alphabet in the English alphabetical series, which of the following will form a meaningful English word?
A
SUM
B
BIG
C
Both BIG and THE
D
FOR
E
Both FOR and BIG
Question 11Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be second from the right ?
A
AND
B
FOR
C
THE
D
BIG
E
SUM
Question 12Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If second alphabet in each of the words is changed to next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed ?
A
None
B
One
C
Two
D
Three
E
Four
Question 13Single Answer
Passage :
Direction : The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
How many letters are there in the English alphabetical series between the second letter of the word which is second from the right and the second letter of the word which is second from the left of the given words?
A
Two
B
Five
C
Six
D
Nine
E
Three
Question 14Single Answer
Passage :
Direction: The following question is based on the five words given below:
AND FOR THE BIG SUM (The new words formed after performing the mentioned operations may or may not necessarily the meaningful English words.)
If in each of the given words, each of the consonant is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will no vowels appear?
A
None
B
One
C
Two
D
Three
E
More than three
Question 15Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the third alphabet in each of the words is changed to the next alphabet in the English alphabetical order, how many words having two vowels (same or different vowels) will be formed?
A
None
B
One
C
Two
D
Three
E
Four
Question 16Single Answer
Passage :
Direction : Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the position of the first and the second alphabets of each of the words are interchanged, which of the following will form a meaningful English word?
A
Both CAT and OWN
B
Both BRU and INK
C
Only CAT
D
Only INK
E
Only LEG
Question 17Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If the given words are arranged in the order as they would appear in a dictionary from left to right, which of the following will be exactly in the middle of the five words?
A
OWN
B
LEG
C
BRU
D
CAT
E
INK
Question 18Single Answer
Passage :
Direction: Following question is based on five words given below: BRU LEGINKCATOWN
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words)
If in each of the given words, each of the consonants is changed to previous letter and each vowel is changed to next letter in the English alphabetical series, in how many words thus formed will the same alphabet appear twice?
A
None
B
One
C
Two
D
Three
E
More than three
Question 19Single Answer
Passage :
Find the missing number in the following series ?
3, 5, 5, 19, 7, 41, 9, ?
A
71
B
61
C
79
D
69
Question 20Single Answer
Passage :
Direction: following question is based on five words given below:
LAP BUT CAR SON HID
(The new words formed after performing the mentioned operations may or may not necessarily be meaningful English words.)
If the positions of the first and the third alphabets of each of the words are interchanged, which of the following would form meaningful words with the new arrangement?
A
HID
B
SON
C
Both LAP and BUT
D
CAR
E
Both CAR and LAP
Question 21Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
How many employees of bank ‘X’ opted for VRS ?
(I) 18% of the 950 officer cadre employees and 6% of the 1100 of all other cadre employees opted for VRS. (II) 28% of the employees in the age group of 51 to 56 and 17% of the employees in all other age groups opted for VRS.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 22Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
The area of a playground is 1600 square meters. What is its perimeter ?
(I) It is a perfect square playground
(II) It costs Rs.3200 to put a fence around the playground at the rate of Rs.20 per meter.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 23Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What is the value of m – n ÷ 37 ?
(I) m is the largest possible six-digit number and n is the smallest possible six-digit number.
(II) The difference between m and n is known.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 24Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What is the value of x ?
(I) If 10 is added to x, the result is 34.
(II) If x is multiplied by y, the result is 38.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 25Single Answer
Passage :
Direction : Each of the questions below consists of a question and two statements numbered (I) and (II) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer :
What was the total compound interest on a sum after three years ?
(I) The interest after one year was Rs. 100 and the sum after was Rs.1000.
(II) The difference between simple and compound interest on a sum of Rs.1000 at the end of two years was Rs.10.
A
Statement (I) ALONE is sufficient, but statement (II) alone is not sufficient
B
Statement (II) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
EACH statement ALONE is sufficient
Question 26Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
Among Japanese Yen, Australian Dollar, Hong Kong Dollar and Singapore Dollar, which currency has the lowest value in terms of Indian rupees ?
(1) One rupee is equal to 2.56 Japanese Yen, 0.338 Australian Dollar, and 0.465 Hong Kong Dollar.
(2) Value of Australian Dollar is equal to Singapore Dollar.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 27Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What is the value of a two-digit number ?
(1) The sum of the two digits is 4.
(2) The difference between the two digits is 2.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 28Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What was the population of State ‘A’ in 1999 ?
(1) Population of the State increases every year by 20% and its population in 1997 was 1,20,000.
(2) Population of State A in 1997 was twice that of State B in the same year.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 29Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
What is the speed of the boat in still water ?
(1) It takes 2 hours to cover the distance between A and B downstream.
(2) It takes 4 hours to cover the distance between A and B upstream.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Question 30Single Answer
Passage :
Each of the questions below consists of a question and two statements numbered (1) and (2) given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
How many vinyl squares with sides 5 inches long will be needed to cover the rectangular floor of a room ?
(1) The floor is 5ft long.
(2) The floor is 3 ft wide.
A
Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient
B
Statement (2) ALONE is sufficient, but statement (I) alone is not sufficient
C
BOTH statements TOGETHER are sufficient, but NEITHER statement alone is sufficient
D
Statements (1) and (2) TOGETHER are NOT sufficient
Quantitative Aptitude
Question 31Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 32Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 33Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 34Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 35Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 36Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 37Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 38Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 39Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 40Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Question 41Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 42Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 43Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 44Single Answer
Convert 0.0909… into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 45Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Question 46Single Answer
Which is smaller ?
A
9/11
B
7/9
C
Equal
D
Cannot compare
Question 47Single Answer
Convert 0.5777… into fraction ?
A
26/45
B
52/90
C
13/22
D
5/9
Question 48Single Answer
Convert 0.81 into fraction ?
A
81/100
B
9/10
C
8/9
D
9/11
Question 49Single Answer
(63)2 – (12)2 =?
A
3528
B
3852
C
3582
D
3825
Question 50Single Answer
Which is greater ?
A
13/17
B
11/14
C
Equal
D
Cannot compare
Important Questions Package
GSSSB Municipal Engineer Exam Online Question Bank Package
Buy GSSSB Municipal Engineer Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GSSSB Municipal Engineer question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
GSSSB Municipal Engineer Exam - English
Description : 1000 Question with Answer
₹101[₹500]
2.
GSSSB Municipal Engineer Exam - English
Description : 2000 Question with Answer
₹151[₹500]
3.
GSSSB Municipal Engineer Exam - English
Description : 3000 Question with Answer
₹181[₹500]
4.
GSSSB Municipal Engineer Exam - English
Description : 4000 Question with Answer
₹201[₹500]
5.
GSSSB Municipal Engineer Exam - English
Description : 5000 Question with Answer
₹221[₹500]
6.
GSSSB Municipal Engineer Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
7.
GSSSB Municipal Engineer Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
Quantitative Aptitude
Question 51Single Answer
16.928 + 24.7582 5.015 =?
A
20
B
24
C
22
D
26
Question 52Single Answer
Convert 0.75 into fraction ?
A
3/4
B
2/3
C
4/5
D
5/8
Question 53Single Answer
Passage :
information given below and answer the question that follow.
The result of an exam is given below. Out of 1000 students who appeared
(i) 658 failed in Physics
(ii) 166 failed in Physics and Chemistry
(iii) 372 failed in Chemistry, 434 failed in Physics and Maths
(iv) 590 failed in Maths, 126 failed in Maths & Chemistry
Find the number of people who failed in (assuming that none is passed in all subjects.
We have the following equations:
a+ b + c + d + e + f + g = 1000
a + b + d + e = 658, b + d = 166
b + d + c + f = 372
d + e = 434 as in the figure.
d + e + f + g = 590, d + f = 126. Find the values
Chemistry but not in Physics.
A
318
B
198
C
213
D
206
Question 54Single Answer
Passage :
Direction: information given below and answer the question that follow.
The result of an exam is given below. Out of 1000 students who appeared
(i) 658 failed in Physics
(ii) 166 failed in Physics and Chemistry
(iii) 372 failed in Chemistry, 434 failed in Physics and Maths
(iv) 590 failed in Maths, 126 failed in Maths & Chemistry
Find the number of people who failed in (assuming that none is passed in all subjects.
We have the following equations:
a+ b + c + d + e + f + g = 1000
a + b + d + e = 658, b + d = 166
b + d + c + f = 372
d + e = 434 as in the figure.
d + e + f + g = 590, d + f = 126. Find the values
Physics or Maths but not in Chemistry.
A
558
B
718
C
628
D
None of these
Question 55Single Answer
Passage :
For the next four question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read all the three papers ?
A
20%
B
25%
C
30%
D
40%
Question 56Single Answer
Passage :
For the next four : question that follow :
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only two papers?
A
19%
B
31%
C
44%
D
None of these
Question 57Single Answer
Passage :
For the next four : question that follow :
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only one paper ?
A
38%
B
48%
C
51%
D
None of these
Question 58Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
What is the percentage of persons who read only A but neither B nor C ?
A
4%
B
3%
C
1%
D
None of these
Question 59Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
If A and B are any two sets, then what is A ᴖ (A ᴗ B) equal to ?
A
Complement of A
B
Complement of B
C
B
D
A
Question 60Single Answer
Passage :
For the next four : question that follow:
In a city, three daily newspapers A, B, C are published, 42% read A; 51% read B; 68% read C; 30% read A and B; 28% read B and C; 36% read A and C; 8% do not read any of the three newspapers.
Let x% people read all the three newspapers.
Since 8% people do not read any newspapers.
(x – 24) + (x – 7) + (x + 4) + (30 – x) + (36 – x) + (28 – x) + x = 92
→ x + 98 – 31 = 92
→ x = 92 – 67 = 25
40% of the people read newspaper X, 50% read newspaper Y and 10% read both the papers. What percentage of the people read neither newspaper ?
A
10%
B
15%
C
20%
D
25%
Indian Constitution, Current Affairs, Gujarati & English Comprehension
Question 61Single Answer
I go to Madurai by —– Vaigai Express
A
a
B
an
C
some
D
the
Question 62Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 63Single Answer
Passage :
Direction : Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has ……………a centralized online databank system for all statutory government bodies to …………an eye on their assets and liabilities.
A
presented , stay
B
introduced , keep
C
announce , make
D
created , let
E
proclaimed , hold
Question 64Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
A
liabilities
B
responsibilities
C
estates
D
profits
Question 65Single Answer
Passage :
Direction : In the question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Affidavit
A
Affirmation
B
Slander
C
Oath
D
Testimony
Question 66Single Answer
"શાંતિ" શબ્દનો અર્થ શું છે ?
A
વાતચીત
B
આક્રમણ
C
ખેડૂત
D
ધમાધમ
Question 67Single Answer
"વ્યક્તિ" શબ્દનો વિલોમ શબ્દ શું છે ?
A
સંગઠન
B
વ્યવસ્થા
C
સંવિદાન
D
અનવરત
Question 68Single Answer
"વિકાસ" શબ્દનું અર્થ શું છે ?
A
અભિવૃદ્ધિ
B
વિઘટન
C
વિદ્યા
D
આકર્ષણ
Question 69Single Answer
"સ્થાન" શબ્દનું વિરોધી શબ્દ શું છે ?
A
ધૂપ
B
દૂર
C
જગ્યા
D
આવેશ
Question 70Single Answer
"મંજિલ" શબ્દનો વ્યાપારિક અર્થ શું છે ?
A
ગોલ
B
ધબ્બુ
C
સાંજ
D
ઉદ્દેશ
Question 71Single Answer
Which Act gave separate electorate rights to Muslims in India ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1915
C
The Government of India Act, 1919
D
The Government of India Act, 1935
Question 72Single Answer
Which one of the following made the Indian Legislature bicameral ?
A
The Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 73Single Answer
'Diarchy' was established in India by which of the following ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1935
C
The Government of India Act, 1919
D
None of the above
Question 74Single Answer
Which one of the following aimed at providing a federal structure for India ?
A
Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 75Single Answer
As a guardian of the government of India Act, 1935 a Court was constituted which was called.
A
Privy Council
B
Supreme Court
C
High Court
D
Federal Court
Question 76Single Answer
Under the Government of India Act 1935, the Federal court had -
A
Original jurisdiction only
B
Appellate jurisdiction only
C
Advisory jurisdiction only
D
Original, appellate and advisory jurisdiction
Question 77Single Answer
Under the Government of India's Act 1935, how many Governors and Chief Commissioners provinces constituted in British India ?
A
14 and 7
B
11 and 7
C
15 and 9
D
None of the above
Question 78Single Answer
The Mountbaten plan led to the enactment of :
A
Government of India Act, 1919
B
Government of India Act, 1935
C
The Indian Independence Act, 1947
D
None of the above
Question 79Single Answer
The plan of Lord Mountbatten was excepted by the congress and the muslim league. The British Parliament enacted the Indian Independence act, 1947 which got Royal assistant on -
A
3 June, 1947
B
4 July, 1947
C
15 July, 1947
D
18 July, 1947
Question 80Single Answer
Which one of the following relates to transfer of power to the Indians and partition of the country ?
A
Simon Commission
B
Cripps Mission
C
Cabinet Mission Plan
D
The Mountbatten plan
Question 81Single Answer
Whats the capital city of Gujarat?
A
Ahmedabad
B
Surat
C
Gandhinagar
D
Vadodara
Question 82Single Answer
Which national parkn Gujarats famous for Asiatic lions?
A
Gir National Park
B
Ranthambore National Park
C
Kanha National Park
D
Bandipur National Park
Question 83Single Answer
Which day is observed on 1 October every year as declared by the United Nations?
A
World Teachers’ Day
B
International Day of Non-Violence
C
World Food Day
D
International Day of Older Persons
Question 84Single Answer
The Union Public Service Commission (UPSC) completed 100 years of its establishment on which date in 2026?
A
26 January 2026
B
1 October 2026
C
15 August 2026
D
26 November 2026
Question 85Single Answer
The Union Cabinet raised the Minimum Support Price (MSP) of wheat for the 2027-28 Rabi season by how much?
A
₹25 per quintal
B
₹15 per quintal
C
₹50 per quintal
D
₹75 per quintal
Question 86Single Answer
The Cabinet approved an Intelligent Traffic Management System (ITMS) for Delhi at an approximate cost of:
A
₹790 crore
B
₹2,790 crore
C
₹1,790 crore
D
₹3,790 crore
Question 87Single Answer
Which initiative was launched under Swachh Bharat Mission–Urban 2.0 to develop 50 model cities?
A
PRAGATI-50
B
Smart City Mission
C
AMRUT 2.0
D
Clean India Mission
Question 88Single Answer
The Indian Navy plans to induct how many warships in 2026 according to Defence Minister Rajnath Singh?
A
10
B
12
C
18
D
15
Question 89Single Answer
The Central Government banned which highly toxic herbicide citing risks to human and animal life?
A
Glyphosate
B
2,4-D
C
Atrazine
D
Paraquat Dichloride
Question 90Single Answer
US forces completed their withdrawal from Iraq after approximately how many years of presence?
A
10 years
B
20+ years (since 2003)
C
15 years
D
30 years
Technical Subject (Civil Engineering)
Question 91Single Answer
A water supply distribution system for an averagely-populated township is to be designed for
A
Maximum daily demand
B
Maximum hourly demand and fire demand
C
Average demand
D
Maximum daily demand and fire demand or maximum hourly demand, whichever is higher
Question 92Single Answer
A combined sewerage system is more appropriate for developed areas where
A
Rainfall occurs for a very few days in a year
B
Rainfall occurs almost uniformly throughout the year
C
Air temperatures are nearly uniform throughout the year
D
Air temperatures through the year include extremes during certain runs of days
Question 93Single Answer
100 m3 of sludge holds a moisture content of 95%. If its moisture content chagnes to 90%, the volume of this sludge will then be
A
40.5m3
B
50m3
C
75m3
D
94.7m3
Question 94Single Answer
The design overflow rate of a sedimentation tank is chosen considering
A
Flow rate through the tank
B
Diameter of the particle intended to be removed
C
Volume of the sedimentation tank
D
Detention time in the tank
Question 95Single Answer
Consider the following statements in respect of flow equalization in a waste water treatment plant :
1. Biological treatment is enhanced because shock loadings are eliminated or minimized
2. Flow equalizations is an attractive option for upgrading the performance of overloaded treatment plants.
3. Inhibiting substances can be diluted and pH can be stabilized
4. Thickening performance of primary sedimentation tanks following grit removal is improved.
Which of the above statements are correct?
A
1, 2, 3 and 4
B
1, 2 and 3 only
C
1, 2 and 4 only
D
3 and 4 only
Question 96Single Answer
Consider the following statements :
1. There will be no defects in select grade timbers.
2. The codal values for strength of grade-II timer without defects may be reduced by 37.5%.
3. For timber used as columns, the permissible stress in ungraded timbers is adopted with a multiplying factor of 0.50.
4. In case of wind force and earthquakes, a modification factor of 1.33 is adopted. Which of the above statements are correct ?
A
1 and 3 only
B
1 and 4 only
C
2 and 4 only
D
2 and 3 only
Question 97Single Answer
Consider the following statements regarding timber :
1. The strength of timber increases by Kiln seasoning.
2. Cutting of wood is to be done prior to treatment.
3. Water seasoning is good for prevention of warping.
4. ASCU treatment enhances the strength of wood. Which of the above statements are correct ?
A
1, 2 and 3 only
B
2, 3 and 4 only
C
1, 3 and 4 only
D
1, 2, 3 and 4
Question 98Single Answer
Gase(s) emitted during rotting or decomposition of timber is /are mainly
A
Methane and Hydrogen
B
Hydrogen Sulphide
C
Carbonic acid and Hydrogen
D
Ammonia
Question 99Single Answer
Efflorescence of bricks is due to
A
Excessive burning of bricks
B
High silt content in brick clay
C
High porosity of bricks
D
Soluble salts present in parent clay
Question 100Single Answer
Disintegration of bricks masonry walls is primarily due to
1. Efflorescence
2. Magnesium sulphate in brick
3. Calcined clay admixtures
4. Kankar nodules
Which of the a above statements are correct ?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 101Single Answer
Consider the following statements:
1. IS 3583 refers to Burnt Clay Paving Bricks.
2. IS 5779 refers to Burnt Clay Soling Bricks.
3. IS 3952 refers to Burnt Clay Hollow Bricks.
4. IS 2222 refers to Burnt Clay Lay Bricks.
Which of the above statements are correct?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 102Single Answer
Consider the following statements:
1. A high aggregate impact value indicates strong aggregates.
2. A low aggregate crushing value indicates high crushing strength of aggregates.
3. Aggregates having elongation index values greater than 15% are generally considered suitable for pavement construction.
4. Flakiness index of aggregates should not be less than 25% for use in road construction.
Which of the above statements are correct?
A
2 and 3 only
B
2 and 4 only
C
1 and 3 only
D
1 and 4 only
Question 103Single Answer
Consider the following statements regarding refractory bricks in furnaces:
1. The furnace is fired at temperatures more than 1700°C.
2. Silica content in the soil should be less than 40%.
3. Water absorption of bricks should not exceed 10%
4. Chrome bricks are known as basic bricks. Which of the above statements are correct?
A
1 and 2 only
B
2 and 4 only
C
1 and 3 only
D
3 and 4 only
Question 104Single Answer
Consider the following statements about lime:
1. Calcination of limestone results in quick lime.
2. Lime produced from pure variety of chalk is hydraulic lime.
3. Hydrated lime is obtained by treating quick lime with water.
Which of the above statements are correct?
A
1, 2 and 3
B
1 and 2 only
C
2 and 3 only
D
1 and 3 only
Question 105Single Answer
Consider the following statements:
1. If more water is added to concrete for increasing its workability, it results into concrete of low strength.
2. No slump is an indication of a good workable concrete.
3. Higher the slump of concrete, lower will be its workability.
4. Workability of concrete is affected by water content as well as water-cement ratio.
Which of the above statements are correct?
A
1 and 3 only
B
2 and 3 only
C
1 and 4 only
D
2 and 4 only
Question 106Single Answer
One bag of Portland cement, 50 kg in weight, would normally have a bulk volume of
A
30 l
B
35 l
C
40 l
D
45 l
Question 107Single Answer
AsCu, a preservative for wood, developed by the Forest Research Institute, Dehradun, comprises of chemicals:
A
1 : 1 : 1
B
1 : 2 : 3
C
1 : 2 : 4
D
1 : 3 : 4
Question 108Single Answer
Consider the following statements related to autoclave bricks:
1.Less water absorption compared to other bricks.
2.Noise reduction
3.It is cheap compared to other types of bricks.
4.Requirement of bulk volume of mortar in joints being relatively less compared to other types of brick masonry.
5.Not recommended for outer walls.
Which of the above statements are relevant to the use of ‘autoclave’ bricks?
A
1, 2 and 4
B
1, 3 and 5
C
2, 3 and 4
D
2, 4 and 5
Question 109Single Answer
The minimum number of annular rings to be seen in every 2.54 cm in the radial direction from the core for timber to be classified as ‘Dense’ is
A
10
B
20
C
25
D
30
Question 110Single Answer
If the actual thickness of a brick masonry wall is 19 cm, its effective length is 2.70 m, its effective height is 2.82 m and its code specified stiffening coefficient is 1.2 then, for design considerations, the slenderness ratio of the wall will be taken as
A
11.8
B
12.4
C
14.2
D
14.8
Question 111Single Answer
Consider the following forms of water in a hydrated cement paste:
1.Capillary water
2.Chemically combined water
3.Interlayer water
4.Adsorbed water
Which of the above forms of water will, on its/their removal, cause shrinkage of the paste?
A
1, 2 and 3
B
1, 2 and 4
C
2, 3 and 4
D
1, 3 and 4
Question 112Single Answer
Consider the following statements:High early strength of cement is obtained as a result of
1.Fine grinding.
2.Decreasing the lime content
3.Burning at higher temperature
4.Increasing the quality of gypsum.
Which of the above statements are correct?
A
1 and 2
B
1 and 3
C
2 and 3
D
3 and 4
Question 113Single Answer
Consider the following statements related to ‘composite mortar’:
1.Addition of lime to cement mortar improves its workability
2.Composite mortar is obtained by adding 10% by weight of cement and mixing with water.
3.Composite mortar is not preferred in tall buildings.
4.Mechanical grinding is essential for developing composite mortar.Which of the above statements are true in this case?
A
1, 2 and 3 only
B
1, 3 and 4 only
C
2, 3 and 4 only
D
1, 2, 3 and 4
Question 114Single Answer
Consider the following statements related to ‘non-destructive testing’ of concrete:
1.Indentation test is used to assess the quality of concrete.
2.Resonant Frequency Method is based on a laboratory test.
3.Compressive strength of concrete is estimated through Pulse Velocity Measurement.
4.Dynamic modulus of Elasticity is determined by a Sonometer Test.
5.Thickness of concrete can be estimated by in-situ Rebound Hammer Test.
Which of the above statements are correct?
A
1, 2 and 3 only
B
1, 2 and 5 only
C
1, 2, 3 and 4 only
D
1, 2, 3, 4 and 5
Question 115Single Answer
What is the amount of water required for a workable RC of mix 1 : 2: 4 by weight., when W/C is 0-60 and unit weight of concrete is 2400 kg/m3?
A
165 l
B
205 l
C
245 l
D
285 l
Question 116Single Answer
Which IS code is used for classification of timber for seasoning purposes?
A
IS : 4970-1973
B
IS : 1708-1969
C
IS : 1141-1958
D
IS : 399-1963
Question 117Single Answer
Consider the following with regard to the application of preservation of timber:
1.Increase in the life span of the member
2.Increase in the strength of the timber
3.Removal of moisture
4.Prevention of growth of fungi by killing them
Which of the above are correct?
A
1, 2, 3 and 4
B
2 and 4 only
C
1 and 4 only
D
2 and 3 only
Question 118Single Answer
The plies in plywood are so placed that the grains of each ply are
A
Parallel to each other
B
At right angle to one another
C
45° oblique to adjacent grain
D
Not constrained by any consideration
Question 119Single Answer
Which of the following is an ODD one as regards ‘requirement of good brick-earth’?
A
It must be free from lumps of lime
B
It should not be mixed with salty water
C
It must be non-homogeneous
D
It should not contain vegetable and organic matter
Question 120Single Answer
The compressive strength of heavy-duty bricks, as per IS : 2980-1962, should not be less than
A
440 kg/cm2
B
175 kg/cm2
C
100kg/cm2
D
75kg/cm2
Question 121Single Answer
Consider the following statements:
1.Brickwork will have high water tightness.
2.Brickwork is preferred for monument structures.
3.Bricks resist fire better than stones
4.Bricks of good quality shall have thin mortar bonds.
Which of the above statements are correct?
A
1 and 2
B
3 and 4
C
2 and 3
D
1 and 4
Question 122Single Answer
Consider the following statements:A good soil for making bricks should contain
1.30% alumina
2.10% lime nodules
3.Only small quantity of iron oxides
4.15% magnesia
Which of the above statements are correct?
A
1 and 2 only
B
1 and 3
C
1, 2 and 4
D
2, 3 and 4
Question 123Single Answer
Which compound of cement is responsible for strength of cement?
A
Magnesium oxide
B
Silica
C
Alumina
D
Calcium sulphate
Question 124Single Answer
Which type of cement is recommended in large mass concrete works such as a dam?
A
Ordinary Portland
B
High Alumina
C
Low-heat Portland
D
Portland Cement
Question 125Single Answer
Consider the following statements regarding ‘setting of cement’:
1.Low-heat cement sets faster than OPC.
2.Final setting time decides the strength of cement
3.Initial setting time of Portland Pozzollona is 30 minutes
4.Air-induced setting is observed when stored under damp conditions.
4.Addition of gypsum retards the setting time.
Which of the above statements are correct?
A
1, 2 and 3
B
2, 3 and 4
C
3, 4 and 5
D
2, 3 and 5
Question 126Single Answer
Consider the following statements regarding ‘strength of cement’:
1.Strength test on cement is made on cubes of cement-sand mix.
2.Water to be used for the paste is 0.25 P, where P is the water needed for normal consistency.
3.The normal consistency is determined on Le Chatelier’s principle.
4.Cubes are cast in two layers in leak-proof moulds further compacted in each layer by vibration on a machine.
Which of the above statements are correct?
A
1 and 2
B
2 and 3
C
1 and 4
D
3 and 4
Question 127Single Answer
Which of the following ingredients refer to binding material of mortar?
1.Cement
2.Lime
3.Sand
4.Ashes
Select the correct answer using the code given below.
A
1 and 4
B
3 and 4
C
1 and 2
D
2 and 3
Question 128Single Answer
Consider the following statements:
1.Bricks in masonry are bound by mortar.
2.Mortars make brick damp-proof.
3.Strength of brick in masonry is improved by plastering.
4.Addition of lime improves workability.
5.Marine construction needs sulphate-resistant cement mortar.
Which of the above statements are relevant for ‘cement mortar’?
A
1, 2 and 3
B
2, 3 and 4
C
1, 4 and 5
D
3, 4 and 5
Question 129Single Answer
Consider the following parameters of concrete:
1.Impermeability
2.Compactness
3.Durability
4.Desired consistency
5.Workability
Which of the above parameters are relevant for ‘water-cement ratio’?
A
4 and 5
B
1 and 2
C
2 and 4
D
3 and 5
Question 130Single Answer
Consider the following statements:Presence of Na2O and K2O in concrete leads to
1.Expansive reaction in concrete
2.Cracking of concrete
3.Disruption of concrete
4.Shrinkage of concrete
Which of the above statements are correct?
A
1 and 2 only
B
2 and 3 only
C
1, 2 and 3
D
3 and 4
Question 131Single Answer
What will be the depth of penetration of the plunger in Vicat Apparatus (IS : 5513 - 1976) from the bottom of the Vicat Mould, when the cement paste is tested for standard consistency, according to IS 4031 – 1988 ?
A
11 to 15 mm
B
8 to 10 mm
C
15 to 17 mm
D
5 to 7 mm
Question 132Single Answer
Two sewer pipelines A and B (having the same diameter and made of the same material) are laid at a bed slope of 1 in 225 and 1 in 625, respectively. Determine the ratio of their carrying capacities (QA to QB) .
A
B
C
1
D
Question 133Single Answer
Select the correct statement with respect to an over - reinforced cement concrete section under the working stress method .
A
The compressive stress in steel reaches the allowable limit before the maximum tensile stress in concrete reaches the allowable limit
B
Tensile steel stress and maximum compressive stress in concrete simultaneously reach their allowable limits
C
The allowable limiting stress is reached in concrete before the steel stress reaches the limiting value
D
The tensile stress in steel reaches the allowable limit before the maximum compressive stress in concrete reaches the allowable limit
Question 134Single Answer
A cantilever beam of span L is built - in at the support. It is restrained against lateral deflection and torsion at the free end. The effective length of compression flange for the beam as per IS 800 : 2007 is
A
0.5 L
B
0.85 L
C
2 L
D
0.75 L
Question 135Single Answer
What is the principle of plane surveying ?
A
Working from part to whole
B
Working from point to area
C
Working from angle to volume
D
Working from whole to part
Question 136Single Answer
According is IS 5968 : 1987, the minimum radius of radius of curve to be provided in the alignment of unlined canals carrying a discharge of less than 30 cumecs up to 15 cumecs is :
A
100 m
B
1000 m
C
600 m
D
150 m
Question 137Single Answer
A Pelton wheel is to be designed for a pitch diameter of 1 m and jet diameter of 0.1 m. The number of buckets on the runner computed by Taygun’s formula is :
A
20
B
25
C
15
D
10
Question 138Single Answer
What is the effect of fly ash in concrete ?
A
Reduces the secondary hydration process
B
Increases the heat of hydration
C
Increases the amount of air entrainment
D
Reduces the heat of hydration
Question 139Single Answer
As per IS 456 : 2000, the minimum grade of concrete to be used for plain concrete and reinforced concrete, respectively, in concrete works exposed directly along the sea coast are :
A
M 20 and M 30
B
M 20 and M 25
C
M 22 and M 40
D
M 15 and M 25
Question 140Single Answer
Identify the property that changes as a function of the geometrical dimensions of a section in structural materials :
A
Mass density
B
Moment of inertia
C
Poission’s ratio
D
Modulus of elasticity
Question 141Single Answer
As per IRC (Indian Roads Congress) recommendation, what will be the designed stopping sight distance (in metres) at the vehicle speed of 80 km/h on a rural highway ?
A
120
B
140
C
70
D
60
Question 142Single Answer
No deduction is made in the quantity estimation for plastering work in cement mortar for openings having size up to :
A
0.5 m2
B
1.0 m2
C
3 m2
D
0.75 m2
Question 143Single Answer
What is the height of slump cone mould used for testing the workability of the concrete ?
A
20 cm
B
10 cm
C
30 cm
D
25 cm
Question 144Single Answer
Select the correct option with regard in the following statements (S1, S2) pertaining to pavements .
S1 : Present serviceability index is used for the functional evaluation of pavement surface condition
S2 : Rigid pavements are less affected by temperature variations than flexible pavements
A
Statements S1 is true and Statement S2 is false
B
Both statements S1 and S2 are false
C
Statements S1 is false and Statement S2 is true
D
Both statements S1 and S2 are true
Question 145Single Answer
If the quadrantal bearing of a line AB is S 31'35' E, then its whole circle bearing is equal in :
A
121o25'
B
148o25'
C
58o25'
D
211o25'
Question 146Single Answer
The overflowing sheet of water on a weir is called :
A
creek
B
crest
C
limp
D
nappe
Question 147Single Answer
According to IS 456 - 2000, what is the slump of a medium degree of workability of concrete if planed in heavily reinforced sections like slabs, beams, walls, columns ?
A
10 - 25 mm
B
25 - 50 mm
C
0 - 10 mm
D
50 - 100 mm
Question 148Single Answer
Which of the following is Kharif season in India ?
A
March / April to June / July
B
December / January to April / May
C
May / June to October / November
D
October / November to April / May
Question 149Single Answer
The estimated value of a built - up property at the end of its useful life without dismantled is called :
A
market value
B
book value
C
scrap value
D
salvage value
Question 150Single Answer
The amount of cement required for 100 m2 area, of damp proof course with 2.5 cm thinkness, in with proportion of 1: 2 : 4 (cement : sand : aggregate) will be :
A
2.5 m2
B
0.55 m2
C
1.10 m2
D
0.25 m2
Question 151Single Answer
Select the correct statement related to increasing the carbon content in steel from 0.2 to 0.9 percent .
A
Increasing the carbon content in steel decreases the yield stress and increases the ductility
B
Increasing the carbon content in steel increases the yield stress and reduces the ductility
C
Increasing the carbon content in steel decreases the yield stress and does not affect the ductility
D
Increasing the carbon content in steel does not have any effect on the yield stress or ductility
Question 152Single Answer
Which of the following laws states that pressure or intensity of pressure at a point is static fluid is equal in all directions ?
A
Newton's law
B
Pascal's law
C
Darcy's law
D
Hydrostatic law
Question 153Single Answer
The determination of plasticity index and the percentage by weight of clay mineral finer than 2 µ present in the soil were done for two soil samples A and B. The ratio of plasticity index to the percentage of clay size particle for the samples A and B are given in the table .
Soil sample Ratio of plasticity index to percentage of clay size particle
Sample A Less than 0.75
Sample B Greater than 1.25 The two soil sample A and B are classified as
A
Sample A : Inactive; Sample B : Active
B
Sample A : Active; Sample B : Normal
C
Sample A : Active; Sample B : Inactive
D
Sample A : Normal ; Sample B : Inactive
Question 154Single Answer
Which of the following compounds of cement is responsible for early strength ?
A
C4AF
B
C3S
C
C3A
D
C2A
Question 155Single Answer
According to SP : 27 - 1984, the thickness of slab or RC slab shall be measured to the nearest of :
A
0.0002 m
B
0.005 m
C
0.0001 m
D
0.01 m
Question 156Single Answer
Classify the following pollutants as primary pollutants (PP) and secondary pollutants (SP). Ozone, Carbon monoxide, Particulate matter, photochemical smog, Nitrogen oxides, Aerosol/mist, Hydrocarbons, Perory - Acetyl - Nitrate, Sulphur dioxide.
bulk unit weight of a soil when it is fully saturated
B
saturated bulk unit weight to total void
C
total void to saturated bulk unit weight
D
total void to saturated bulk unit weight
Question 158Single Answer
Identify the test to be conducted for the determination of the modulus of subgrade reaction in pavement design .
A
Plate bearing test
B
Triaxial test
C
CBR test
D
Direct shear test
Question 159Single Answer
In limit state design, the design bond stress for deformed bars (conforming to IS 1786) for M20 concrete mentioned in IS 456 : 2000 is (in N/mm2 units) :
A
1.2
B
1.8
C
1.68
D
1.92
Question 160Single Answer
Which of the following can be considered as a taking off point in road planning in India ?
A
Lucknow plan
B
Delhi plan
C
Bombay plan
D
Nagpur plan
Question 161Single Answer
What is the primary focus of kinematics in dynamics?
A
Forces causing motion
B
Motion without forces
C
Energy conservation
D
Momentum transfer
Question 162Single Answer
What is the primary purpose of evaluating bearing capacity in foundation design?
A
Ensure soil can support loads without failure
B
Minimize construction cost
C
Increase settlement
D
Enhance aesthetic appeal
Question 163Single Answer
Which bearing capacity theory is commonly used for shallow foundations?
A
Terzaghi’s theory
B
Rankine’s theory
C
Coulomb’s theory
D
Taylor’s theory
Question 164Single Answer
What field test is commonly used to estimate bearing capacity?
A
Standard Penetration Test (SPT)
B
Proctor test
C
Consolidation test
D
Triaxial test
Question 165Single Answer
What is the factor of safety for allowable bearing capacity?
A
2.5 to 3
B
1.5 to 2
C
4 to 5
D
1 to 1.5
Question 166Single Answer
What is immediate settlement in foundation design?
A
Elastic settlement occurring instantly
B
Settlement due to consolidation
C
Settlement due to shear failure
D
Settlement due to compaction
Question 167Single Answer
What is the allowable settlement for isolated footings on clay?
A
75 mm
B
50 mm
C
25 mm
D
100 mm
Question 168Single Answer
What is the allowable settlement for isolated footings on sand?
A
50 mm
B
75 mm
C
25 mm
D
100 mm
Question 169Single Answer
What is the primary purpose of proportioning shallow foundations?
A
Ensure uniform load distribution and stability
B
Minimize material usage
C
Increase settlement
D
Enhance aesthetic appeal
Question 170Single Answer
What is an isolated footing used for?
A
Support single column loads
B
Support multiple columns
C
Distribute load over large area
D
Support bridge piers
Question 171Single Answer
What is a combined footing used for?
A
Support two or more closely spaced columns
B
Support single column
C
Distribute load over weak soil
D
Support machine loads
Question 172Single Answer
What is a raft foundation used for?
A
Distribute load over large area in weak soils
B
Support single column
C
Minimize construction cost
D
Support deep foundations
Question 173Single Answer
What is a common type of pile foundation?
A
Driven precast pile
B
Spread footing
C
Strip footing
D
Mat foundation
Question 174Single Answer
What is the primary function of a pile foundation?
A
Transfer load to deeper, stronger soil
B
Distribute load over surface soil
C
Reduce settlement in firm soil
D
Increase soil permeability
Question 175Single Answer
What is the static formula for pile capacity based on?
A
Skin friction and end bearing
B
Soil permeability
C
Consolidation settlement
D
Shear strength only
Question 176Single Answer
What is a common dynamic formula for pile capacity?
A
Engineering News formula
B
Terzaghi’s formula
C
Meyerhof’s formula
D
Skempton’s formula
Question 177Single Answer
What is the formula for pile capacity using the Engineering News formula?
A
Q_u = (W h) / (s + C)
B
Q_u = (W h) / s
C
Q_u = (W h) / C
D
Q_u = (W h) / (s - C)
Question 178Single Answer
What is the primary consideration in pile group design?
A
Group efficiency and settlement
B
Individual pile capacity only
C
Soil permeability
D
Construction cost
Question 179Single Answer
What is the efficiency of a pile group?
A
Ratio of group capacity to sum of individual capacities
B
Ratio of individual capacity to group capacity
C
Ratio of settlement to load
D
Ratio of skin friction to end bearing
Question 180Single Answer
What is the purpose of a pile load test?
A
Verify pile capacity and settlement
B
Measure soil permeability
C
Calculate consolidation
D
Assess slope stability
Question 181Single Answer
What is the maximum test load in a pile load test as per IS 2911?
A
2.5 times design load
B
1.5 times design load
C
3 times design load
D
1 times design load
Question 182Single Answer
What is the settlement of a pile group primarily caused by?
A
Compression of soil below pile tips
B
Elastic deformation of piles
C
Shear failure of piles
D
Compaction of soil
Question 183Single Answer
What is the primary method for analyzing piles under lateral loads?
A
P-y curve method
B
Terzaghi’s method
C
Boussinesq’s method
D
Newmark’s method
Question 184Single Answer
What is a key consideration for pile foundations in bridge design?
A
Scour depth and lateral stability
B
Soil permeability only
C
Consolidation settlement
D
Construction cost only
Question 185Single Answer
What is the purpose of ground improvement techniques?
A
Enhance soil strength and reduce settlement
B
Increase soil permeability
C
Reduce soil density
D
Increase construction cost
Question 186Single Answer
What is the primary property of a fluid?
A
Inability to resist shear stress
B
High compressive strength
C
Fixed shape
D
High rigidity
Question 187Single Answer
What is the specific gravity of a fluid?
A
Ratio of fluid density to water density
B
Ratio of fluid viscosity to water viscosity
C
Ratio of fluid pressure to water pressure
D
Ratio of fluid volume to water volume
Question 188Single Answer
What is the total pressure force on a vertical plane surface submerged in a fluid?
A
F = p g h_c A
B
F = p g A
C
F = p h_c A
D
F = p g h_c / A
Question 189Single Answer
Where is the center of pressure located for a vertical plane surface?
A
Below the centroid
B
At the centroid
C
Above the centroid
D
At the surface
Question 190Single Answer
What is the force on a curved surface submerged in a fluid?
A
Sum of horizontal and vertical components
B
Horizontal component only
C
Vertical component only
D
No force
Question 191Single Answer
What is fluid kinematics concerned with?
A
Motion of fluid without considering forces
B
Forces causing fluid motion
C
Fluid properties at rest
D
Energy transfer in fluids
Question 192Single Answer
What is a streamline in fluid flow?
A
Path traced by a fluid particle tangent to velocity
B
Path perpendicular to velocity
C
Path of constant pressure
D
Path of constant density
Question 193Single Answer
What is the condition for irrotational flow?
A
Zero vorticity
B
Constant velocity
C
Zero velocity
D
Constant pressure
Question 194Single Answer
What is the velocity potential in fluid flow?
A
Scalar function whose gradient gives velocity
B
Vector function of pressure
C
Scalar function of density
D
Vector function of vorticity
Question 195Single Answer
What is the stream function used for?
A
Represent two-dimensional incompressible flow
B
Calculate pressure distribution
C
Measure vorticity
D
Determine fluid density
Question 196Single Answer
What is a flownet?
A
Grid of streamlines and equipotential lines
B
Grid of pressure lines
C
Grid of velocity lines
D
Grid of density lines
Question 197Single Answer
What is the property of a flownet?
A
Streamlines and equipotential lines are perpendicular
B
Streamlines are parallel
C
Equipotential lines are parallel
D
Streamlines and equipotential lines are parallel
Question 198Single Answer
What is a source in fluid flow?
A
Point where fluid flows radially outward
B
Point where fluid converges
C
Point of zero velocity
D
Point of constant pressure
Question 199Single Answer
What is a sink in fluid flow?
A
Point where fluid flows radially inward
B
Point where fluid flows outward
C
Point of zero vorticity
D
Point of constant velocity
Question 200Single Answer
What is flow separation in fluid flow?
A
Fluid detaching from a surface due to adverse pressure gradient
B
Fluid merging with a surface
C
Fluid maintaining constant velocity
D
Fluid becoming turbulent
Question 201Single Answer
What is a free vortex?
A
Rotational flow with constant angular velocity
B
Irrotational flow with velocity inversely proportional to radius
C
Flow with no vorticity
D
Flow with constant pressure
Question 202Single Answer
What is a forced vortex?
A
Rotational flow with constant angular velocity
B
Irrotational flow with constant velocity
C
Flow with no vorticity
D
Flow with constant pressure
Question 203Single Answer
What is fluid dynamics concerned with?
A
Forces and energy causing fluid motion
B
Fluid motion without forces
C
Fluid properties at rest
D
Fluid density only
Question 204Single Answer
What is the control volume approach used for?
A
Apply conservation laws to a fixed region
B
Measure fluid density
C
Calculate fluid viscosity
D
Determine fluid temperature
Question 205Single Answer
What is the momentum equation based on?
A
Newton second law
B
Newton first law
C
Newton third law
D
Bernoulli principle
Question 206Single Answer
What is the energy equation for steady flow?
A
Bernoulli equation
B
Continuity equation
C
Momentum equation
D
Navier-Stokes equation
Question 207Single Answer
What is the Navier-Stokes equation used for?
A
Describe motion of viscous fluids
B
Calculate fluid density
C
Measure fluid pressure
D
Determine fluid temperature
Question 208Single Answer
What is Euler equation of motion?
A
Simplified Navier-Stokes for inviscid flow
B
Equation for viscous flow
C
Equation for static fluids
D
Equation for compressible flow
Question 209Single Answer
What is the coefficient of discharge (C_d) for an orifice?