How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
A
Two
B
Three
C
Five
D
Four
E
None of these
Question 2Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
A
True
B
False
C
Uncertain
D
None
Question 3Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
A
A
B
E
C
T
D
X
E
Y
Question 4Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
A
None
B
One
C
Two
D
Three
E
More than three
Question 5Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 6Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 7Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
A
T
B
L
C
E
D
Y
E
X
Question 8Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
A
None
B
One
C
Two
D
Three
E
More than three
Question 9Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 10Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’ and if no such word can be formed your answer is ‘B’.
A
V
B
T
C
E
D
A
E
B
Question 11Single Answer
If each alternate letter beginning with the first in the word WORKING is replaced by the next letter in the English alphabet and each of the remaining letters is replaced by the previous letter in the English alphabet, which of the following will be the fourth from the right and after the replacement ?
A
N
B
Q
C
J
D
M
E
None of these
Question 12Single Answer
How many pairs of letters are there in the word ‘SHIFTED’ each of which has as many letters between its two letters as there are between in the English alphabet?
A
None
B
One
C
Two
D
Three
E
None of these
Question 13Single Answer
Statement: Is common currency a necessary ingredient for Europe’s growth ?
Arguments :
I. Yes, A common currency will enable entire Europe to market itself as one .
II. No, Similar experiments by Latin America countries have not affected their economies .
A
The only argument I is strong
B
Only argument II is strong
C
Either I or II is strong
D
Neither I nor II is strong
Question 14Single Answer
If it is possible to make only one meaningful word with the first, the fifth, the sixth, the tenth and the eleventh letters of the word EXCEPTIONAL using each letter only once, first letter of that word is your answer. If no such word can be made formed your answer is ‘X’ and if more than one such word can be formed your answer is ‘Y’.
A
P
B
L
C
T
D
X
E
Y
Question 15Single Answer
How many meaningful English words can be formed with the letters RAE using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 16Single Answer
How many such pairs of letters are there in the word WONDERS, each of which has as many letters between its two letters as there are between them in the English alphabet?
A
One
B
Two
C
Three
D
Four
E
More than four
Question 17Single Answer
If it is possible to make only one meaningful English word from the second, the fifth, the seventh and the eighth letters of the word PHYSICAL, using each letter only once, second letter of that word is your answer. If more than one such word can be formed your answer is M. if no such word can be formed your answer is N.
A
I
B
A
C
L
D
M
E
N
Question 18Single Answer
How many such pairs of letters are there in the word JUSTIFY, each of which have as many letters between them in the word as they have between them in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 19Single Answer
If the alphabets are assigned values as A=3, D=6, G=8, I=2, L=4 and T=5 then what is the sum of values of all the alphabets in the word DIGITAL?
A
26
B
28
C
30
D
32
E
None of these
Question 20Single Answer
How many such pairs of letters are there in the word EDUCATION, each of which has as many letters between them in the word as they have in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 21Single Answer
How many such pairs of letters are there in the word MEASURE each of which has as many letters between them in the word as in the English alphabet?
A
None
B
One
C
Two
D
Three
E
More than three
Question 22Single Answer
How many meaningful English words can be formed with the letters LMAE using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 23Single Answer
If each consonant in the word EXPLORATION is replaced by previous the alphabet and each vowel replaced by alphabet following it in the English alphabetic series, and then the order of the alphabets thus formed is reversed, which of the following from the right?
A
P
B
Q
C
B
D
K
E
None of these
Question 24Single Answer
If the letters in the word AMONGST are arranged in the English alphabetical order, the position of how many letters will remain unchanged?
A
None
B
One
C
Three
D
Four
E
More than Four
Question 25Single Answer
How many meaningful English words can be formed with the letters ACRS using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
More than three
Question 26Single Answer
How many such pairs of letters there in the word, UNWANTED, each of which has as many letters between its two letters as there are between them in the English alphabets?
A
None
B
One
C
Two
D
Three
E
More than three
Question 27Single Answer
How many meaningful English words can be made with the letters EIND using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
None of these
Question 28Single Answer
How many such pairs of letters are there in the word, ‘TROUBLE’, each of which has as many letters between its two letters as there are between them in the English alphabet?
A
None
B
One
C
Two
D
Three
E
None of these
Question 29Single Answer
How many such pairs of letters there in the word DOUBTS each of which has as many letters between its two letters as there are between them in the English alphabet?
A
None
B
One
C
Two
D
Three
E
None of these
Question 30Single Answer
How many meaningful English words can be made with the letters ESDO using each letter only once in each word?
A
None
B
One
C
Two
D
Three
E
None of these
Quantitative Aptitude
Question 31Single Answer
The cash difference between the selling prices of an article at a profit of 4% and 6% is Rs. 3. The ratio of the two selling prices is:__________ ?
A
51:52
B
52:53
C
51:53
D
52:55
Question 32Single Answer
Which of the following numbers is irrational ?
A
√49
B
0.125
C
√2
D
22/7
Question 33Single Answer
356 x 936 – 356 x 836 = ?
A
35600
B
34500
C
9630
D
93600
Question 34Single Answer
Arrange in descending order: 5/8, 7/10, 3/4
A
3/4 > 7/10 > 5/8
B
7/10 > 3/4 > 5/8
C
3/4 > 5/8 > 7/10
D
5/8 > 7/10 > 3/4
Question 35Single Answer
What is (3^{4} times 9^{2}) ?
A
36
B
38
C
310
D
96
Question 36Single Answer
If 34X-2 = 729, then find the value of X.
A
4
B
3
C
2
D
5
Question 37Single Answer
Convert 0.6 into fraction ?
A
3/5
B
2/3
C
4/5
Question 38Single Answer
The no. plate of a bus had peculiarity. The bus number was a perfect square. It was also a perfect square when the plate numbers were reversed. The bus company had only five hundred buses numbered from 1 to 500. What was the number ?
A
169
B
36
C
196
D
Can not say
Question 39Single Answer
If a and b are positive integers, such that ab = 125, then (a-b)a+b-4 = ?
A
16
B
25
C
28
D
30
Question 40Single Answer
If x*y = x2 + y2 – xy, then value of 9*11 is
A
93
B
103
C
60.5
D
121
Question 41Single Answer
Which is greater ?
A
15/16
B
17/18
C
Equal
D
Cannot compare
Question 42Single Answer
If sum of two numbers is 42 and their product is 437, then find their difference.
A
3
B
4
C
5
D
7
Question 43Single Answer
Write the 44000 in Roman numerals
A
XLI
B
XLVI
C
XLIV
D
XLVIC
Question 44Single Answer
Convert 0.0909… into fraction ?
A
1/11
B
9/11
C
1/9
D
9/10
Question 45Single Answer
What is (98 times 102) ?
A
9996
B
10000
C
10096
D
10196
Question 46Single Answer
Which is smaller ?
A
9/11
B
7/9
C
Equal
D
Cannot compare
Question 47Single Answer
Convert 0.5777… into fraction ?
A
26/45
B
52/90
C
13/22
D
5/9
Question 48Single Answer
Convert 0.81 into fraction ?
A
81/100
B
9/10
C
8/9
D
9/11
Question 49Single Answer
(63)2 – (12)2 =?
A
3528
B
3852
C
3582
D
3825
Question 50Single Answer
Which is greater ?
A
13/17
B
11/14
C
Equal
D
Cannot compare
Important Questions Package
GSSSB Mines Supervisor Exam Online Question Bank Package
Buy GSSSB Mines Supervisor Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GSSSB Mines Supervisor question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
GSSSB Mines Supervisor Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
2.
GSSSB Mines Supervisor Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
3.
GSSSB Mines Supervisor Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹221[₹550]
4.
GSSSB Mines Supervisor Exam Question - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
Quantitative Aptitude
Question 51Single Answer
16.928 + 24.7582 5.015 =?
A
20
B
24
C
22
D
26
Question 52Single Answer
Convert 0.75 into fraction ?
A
3/4
B
2/3
C
4/5
D
5/8
Question 53Single Answer
Which is greater ?
A
11/13
B
12/15
C
Equal
D
Cannot compare
Question 54Single Answer
Two numbers are co-prime if their HCF is ?
A
0
B
1
C
Same
D
Prime
Question 55Single Answer
Product of all factors of 10 is ?
A
10
B
100
C
1000
D
10000
Question 56Single Answer
How many real numbers exist between 2 and 3 ?
A
1
B
10
C
Infinite
D
None
Question 57Single Answer
Which number is divisible by 11 ?
A
12345
B
1331
C
1234
D
1213
Question 58Single Answer
What is the unit digit of (7^{245}) ?
A
1
B
3
C
7
D
9
Question 59Single Answer
What is (64^{2/3}) ?
A
4
B
8
C
16
D
32
Question 60Single Answer
What is (125^{1/3}) ?
A
3
B
4
C
5
D
6
Constitution, Current Affairs, Gujarati & English Comprehension
Question 61Single Answer
Yojna a weekly journal
A
Ministry of Finance
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 62Single Answer
In ruby laser, the stimulated emission is due to transition from
A
metastable state to any lower state
B
any higher state of lower state
C
metastable state to ground state
D
any higher state to ground state
Question 63Single Answer
10-6 M NaOH is diluted 100 times. The pH of the diluted base is
A
between 7 and 8
B
between 5 and 6
C
between 6 and 7
D
between 10 and 11
Question 64Single Answer
The respiratory quotient during cellular respiration would depend on
A
the nature of enzymes involved
B
the nature of the substrate
C
the amount of carbon dioxide released
D
the amount of oxygen utilised
Question 65Single Answer
I go to Madurai by —– Vaigai Express
A
a
B
an
C
some
D
the
Question 66Single Answer
Have the car stolen!
A
Steal the car
B
You should have the stolen car
C
Get someone to steal the car
D
They have stolen the car
Question 67Single Answer
The payment was collected by the hardworking salesman.
A
The hardworking salesman collected the payment.
B
the salesman who worked heard was able to collect the payment.
C
to collect the payment the salesman had to work hard.
D
The hardworking salesman was able to collect the payment.
Question 68Single Answer
I had to stop all my work to complete this project.
A
All other work had to be stopped to complete this project by me
B
For completing this project all other work must be stopped
C
For completing this project I had to stop all my work
D
To complete this project all other work had been stopped by me
Question 69Single Answer
They have published the names of all the successful candidates.
A
The candidates who have succeeded their names they had published.
B
The names of all the successful candidates have been published by them
C
The candidates who have succeeded their names have been published by them.
D
The names of all the successful candidate were published by them.
Question 70Single Answer
"શાંતિ" શબ્દનો અર્થ શું છે ?
A
વાતચીત
B
આક્રમણ
C
ખેડૂત
D
ધમાધમ
Question 71Single Answer
"વ્યક્તિ" શબ્દનો વિલોમ શબ્દ શું છે ?
A
સંગઠન
B
વ્યવસ્થા
C
સંવિદાન
D
અનવરત
Question 72Single Answer
"વિકાસ" શબ્દનું અર્થ શું છે ?
A
અભિવૃદ્ધિ
B
વિઘટન
C
વિદ્યા
D
આકર્ષણ
Question 73Single Answer
"સ્થાન" શબ્દનું વિરોધી શબ્દ શું છે ?
A
ધૂપ
B
દૂર
C
જગ્યા
D
આવેશ
Question 74Single Answer
"મંજિલ" શબ્દનો વ્યાપારિક અર્થ શું છે ?
A
ગોલ
B
ધબ્બુ
C
સાંજ
D
ઉદ્દેશ
Question 75Single Answer
Which Act gave separate electorate rights to Muslims in India ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1915
C
The Government of India Act, 1919
D
The Government of India Act, 1935
Question 76Single Answer
Which one of the following made the Indian Legislature bicameral ?
A
The Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 77Single Answer
'Diarchy' was established in India by which of the following ?
A
The Indian Councils Act, 1909
B
The Government of India Act, 1935
C
The Government of India Act, 1919
D
None of the above
Question 78Single Answer
Which one of the following aimed at providing a federal structure for India ?
A
Indian Councils Act, 1909
B
Government of India Act, 1919
C
Government of India Act, 1935
D
Indian Independence Act, 1947
Question 79Single Answer
As a guardian of the government of India Act, 1935 a Court was constituted which was called.
A
Privy Council
B
Supreme Court
C
High Court
D
Federal Court
Question 80Single Answer
What is the lithosphere composed of ?
A
Water and gases
B
Rocks and minerals
C
Living organisms
D
Air and gases
Question 81Single Answer
Whats the capital city of Gujarat?
A
Ahmedabad
B
Surat
C
Gandhinagar
D
Vadodara
Question 82Single Answer
Which national parkn Gujarats famous for Asiatic lions?
A
Gir National Park
B
Ranthambore National Park
C
Kanha National Park
D
Bandipur National Park
Question 83Single Answer
Which river flows through the city of Ahmedabad?
A
Sabarmati
B
Tapi
C
Narmada
D
Mahi
Question 84Single Answer
Whats the official language of Gujarat?
A
Gujarati
B
Hindi
C
Marathi
D
Konkani
Question 85Single Answer
Which dance forms native to Gujarat?
A
Garba
B
Bhangra
C
Lavani
D
Kathakali
Question 86Single Answer
Which Indian state launched the ‘Green Energy Villages’ initiative in 2025 to promote renewable energy?
A
Uttar Pradesh
B
Rajasthan
C
Tamil Nadu
D
Gujarat
Question 87Single Answer
Which organization developed the K-6 hypersonic Submarine-Launched Ballistic Missile (SLBM) tested in 2025?
A
ISRO
B
HAL
C
Bharat Dynamics Limited
D
DRDO
Question 88Single Answer
Which ministry established the Passport Seva Portal to streamline passport services in 2025?
A
Ministry of Home Affairs
B
Ministry of Corporate Affairs
C
Ministry of External Affairs
D
Ministry of Electronics and IT
Question 89Single Answer
What is the primary goal of the Digital Payment Intelligence Platform (DPIP) launched by the RBI in 2025?
A
Promote cash transactions
B
Enhance cybersecurity in digital payments
C
Reduce ATM usage
D
Increase bank branch networks
Question 90Single Answer
Which Indian state topped the vulture population census in 2025?
A
Rajasthan
B
Gujarat
C
Madhya Pradesh
D
Maharashtra
Mining
Question 91Single Answer
Which factor most significantly impacts the selection of a surface mining method for a steeply dipping ore body?
A
Uniform ore distribution
B
Simplified waste management
C
Low equipment availability
D
High overburden thickness
Question 92Single Answer
What complicates the application of open-pit mining in waterlogged terrains?
A
High water table management
B
Effective dewatering systems
C
Uniform groundwater levels
D
Simplified slope stability
Question 93Single Answer
Which underground mining method is most suitable for a thick, flat-lying coal seam with weak roof conditions?
A
Room-and-pillar mining
B
Longwall mining
C
Cut-and-fill mining
D
Sublevel caving
Question 94Single Answer
What is a primary challenge in implementing longwall mining in gassy seams?
A
Uniform ventilation systems
B
Simplified coal extraction
C
Excessive roof stability
D
Controlling methane emissions
Question 95Single Answer
Which surface mining method is most effective for extracting thin, near-surface mineral deposits?
A
Open-pit mining
B
Quarrying
C
Strip mining
D
Dredging
Question 96Single Answer
What complicates the stability of benches in open-pit mining?
A
Uniform rock strength
B
Excessive equipment capacity
C
Variable geotechnical conditions
D
Simplified blasting techniques
Question 97Single Answer
Which underground mining method requires precise control to prevent ore dilution?
A
Block caving
B
Longwall mining
C
Cut-and-fill mining
D
Room-and-pillar mining
Question 98Single Answer
What is a key limitation of sublevel caving in underground mining?
A
High dilution rates
B
Excessive ore recovery
C
Uniform ground support
D
Simplified ventilation
Question 99Single Answer
Which surface mining method is most suitable for extracting alluvial gold deposits?
A
Placer mining
B
Strip mining
C
Open-pit mining
D
Quarrying
Question 100Single Answer
What complicates the use of hydraulic mining in surface operations?
A
Environmental impact of water usage
B
Uniform water availability
C
Excessive equipment durability
D
Simplified sediment control
Question 101Single Answer
Which underground mining method is most prone to spontaneous combustion in coal seams?
A
Room-and-pillar mining
B
Longwall mining
C
Sublevel stoping
D
Cut-and-fill mining
Question 102Single Answer
What is a primary challenge in maintaining slope stability in deep open-pit mines?
A
Uniform rock composition
B
Excessive bench width
C
High geotechnical stresses
D
Simplified monitoring systems
Question 103Single Answer
Which underground mining method is most suitable for steeply dipping, narrow ore veins?
A
Shrinkage stoping
B
Block caving
C
Longwall mining
D
Room-and-pillar mining
Question 104Single Answer
What complicates the implementation of block caving in underground mining?
A
Uniform ore fragmentation
B
Excessive ground stability
C
High initial capital investment
D
Simplified drawpoint design
Question 105Single Answer
Which surface mining method requires extensive overburden removal for deep deposits?
A
Open-pit mining
B
Strip mining
C
Placer mining
D
Dredging
Question 106Single Answer
What is a key challenge in controlling dust in surface mining operations?
A
Uniform wind patterns
B
Effective dust suppression systems
C
Simplified blasting techniques
D
High particulate dispersion
Question 107Single Answer
Which underground mining method is most effective for extracting massive ore bodies with low-grade ore?
A
Cut-and-fill mining
B
Block caving
C
Longwall mining
D
Sublevel stoping
Question 108Single Answer
What complicates the ventilation design in longwall mining?
A
High methane and dust levels
B
Uniform airflow distribution
C
Excessive fan capacity
D
Simplified airway maintenance
Question 109Single Answer
Which surface mining method is most suitable for extracting limestone in hilly terrains?
A
Strip mining
B
Open-pit mining
C
Quarrying
D
Placer mining
Question 110Single Answer
What is a primary limitation of room-and-pillar mining in underground operations?
A
High pillar abandonment losses
B
Excessive ore recovery
C
Uniform ground support
D
Simplified ventilation systems
Question 111Single Answer
Which factor most significantly affects the efficiency of open-pit mining?
A
High stripping ratio
B
Uniform ore grade
C
Excessive equipment availability
D
Simplified haulage systems
Question 112Single Answer
What complicates the use of in-situ leaching in surface mining?
A
Controlling groundwater contamination
B
Uniform mineral dissolution
C
Excessive solution recovery
D
Simplified chemical handling
Question 113Single Answer
Which underground mining method is most suitable for highly fractured ore bodies?
A
Cut-and-fill mining
B
Longwall mining
C
Block caving
D
Room-and-pillar mining
Question 114Single Answer
What is a key challenge in implementing sublevel stoping in underground mining?
A
Maintaining stope stability
B
Uniform ore fragmentation
C
Excessive drilling accuracy
D
Simplified blasting techniques
Question 115Single Answer
Which surface mining method is most effective for extracting coal seams near the surface?
A
Open-pit mining
B
Strip mining
C
Placer mining
D
Dredging
Question 116Single Answer
What complicates the reclamation of land after open-pit mining?
A
Uniform soil composition
B
Excessive vegetation regrowth
C
High ecological restoration costs
D
Simplified topography management
Question 117Single Answer
Which underground mining method is most suitable for low-dipping, thick ore bodies?
A
Shrinkage stoping
B
Sublevel caving
C
Longwall mining
D
Cut-and-fill mining
Question 118Single Answer
What is a primary challenge in controlling ground subsidence in block caving?
A
Uniform overburden strength
B
Simplified caving mechanics
C
Excessive monitoring systems
D
High surface impact prediction
Question 119Single Answer
Which surface mining method is most suitable for extracting heavy minerals from beach sands?
A
Open-pit mining
B
Placer mining
C
Strip mining
D
Quarrying
Question 120Single Answer
What complicates the use of explosives in open-pit mining?
A
Uniform blast fragmentation
B
Controlling flyrock and vibrations
C
Excessive explosive availability
D
Simplified blast design
Question 121Single Answer
What is a key limitation of strip mining in surface operations?
A
High overburden handling costs
B
Excessive ore recovery
C
Uniform land reclamation
D
Simplified equipment maintenance
Question 122Single Answer
Which underground mining method requires continuous backfilling to maintain stability?
A
Cut-and-fill mining
B
Longwall mining
C
Sublevel caving
D
Room-and-pillar mining
Question 123Single Answer
What complicates the design of haul roads in open-pit mining?
A
Uniform terrain conditions
B
Excessive road durability
C
High traffic and load management
D
Simplified gradient control
Question 124Single Answer
Which surface mining method is most suitable for extracting granite blocks?
A
Strip mining
B
Open-pit mining
C
Quarrying
D
Placer mining
Question 125Single Answer
What is a primary challenge in maintaining ventilation in deep underground mines?
A
Uniform airflow distribution
B
High heat and humidity levels
C
Excessive fan capacity
D
Simplified airway design
Question 126Single Answer
Which underground mining method is most effective for extracting high-grade, narrow veins?
A
Block caving
B
Shrinkage stoping
C
Longwall mining
D
Room-and-pillar mining
Question 127Single Answer
What complicates the use of dredging in surface mining?
A
High environmental impact on water bodies
B
Uniform sediment composition
C
Excessive equipment availability
D
Simplified material handling
Question 128Single Answer
Which underground mining method is most suitable for massive, low-grade ore deposits?
A
Cut-and-fill mining
B
Sublevel stoping
C
Longwall mining
D
Block caving
Question 129Single Answer
What is a key challenge in controlling noise pollution in open-pit mining?
A
High machinery noise levels
B
Uniform equipment silencing
C
Excessive sound barriers
D
Simplified operational controls
Question 130Single Answer
Which surface mining method is most effective for extracting shallow coal deposits?
A
Open-pit mining
B
Strip mining
C
Placer mining
D
Dredging
Question 131Single Answer
What complicates the use of longwall mining in highly faulted geological structures?
A
Uniform coal seam continuity
B
Simplified roof support systems
C
Excessive shearer efficiency
D
High fault-induced disruptions
Question 132Single Answer
Which underground mining method is most suitable for extracting thin, steeply dipping veins?
A
Cut-and-fill mining
B
Room-and-pillar mining
C
Sublevel caving
D
Longwall mining
Question 133Single Answer
What is a primary limitation of open-pit mining in densely populated areas?
A
Uniform land availability
B
Excessive ore accessibility
C
High environmental and social impacts
D
Simplified reclamation processes
Question 134Single Answer
Which underground mining method is most prone to high dilution rates?
A
Cut-and-fill mining
B
Sublevel caving
C
Longwall mining
D
Room-and-pillar mining
Question 135Single Answer
What complicates the design of waste dumps in surface mining?
A
High geotechnical failure risks
B
Uniform soil stability
C
Excessive dump capacity
D
Simplified slope design
Question 136Single Answer
Which underground mining method is most effective for extracting flat-lying, soft rock deposits?
A
Block caving
B
Sublevel stoping
C
Longwall mining
D
Shrinkage stoping
Question 137Single Answer
What is a key challenge in implementing in-situ leaching for uranium extraction?
A
Controlling solution containment
B
Uniform mineral dissolution
C
Excessive chemical availability
D
Simplified recovery systems
Question 138Single Answer
Which surface mining method is most suitable for extracting placer gold from riverbeds?
A
Open-pit mining
B
Placer mining
C
Strip mining
D
Quarrying
Question 139Single Answer
What complicates the use of explosives in underground mining?
A
Uniform blast fragmentation
B
Simplified blast design
C
Excessive explosive availability
D
Controlling ground vibrations
Question 140Single Answer
Which underground mining method is most suitable for weak, massive ore bodies?
A
Room-and-pillar mining
B
Cut-and-fill mining
C
Block caving
D
Sublevel stoping
Question 141Single Answer
What is a primary challenge in maintaining bench stability in open-pit mining?
A
Uniform rock strength
B
Simplified monitoring systems
C
Excessive bench width
D
High geotechnical variability
Question 142Single Answer
Which underground mining method requires extensive ground support for safety?
A
Cut-and-fill mining
B
Longwall mining
C
Sublevel caving
D
Room-and-pillar mining
Question 143Single Answer
What complicates the reclamation of strip-mined land?
A
Uniform soil composition
B
High ecological restoration costs
C
Excessive vegetation regrowth
D
Simplified topography management
Question 144Single Answer
Which surface mining method is most suitable for extracting dimension stone?
A
Strip mining
B
Open-pit mining
C
Placer mining
D
Quarrying
Question 145Single Answer
What is a key limitation of longwall mining in underground operations?
A
High roof control requirements
B
Excessive ore recovery
C
Uniform ventilation systems
D
Simplified coal extraction
Question 146Single Answer
Which underground mining method is most effective for extracting high-grade, narrow ore veins?
A
Shrinkage stoping
B
Block caving
C
Longwall mining
D
Room-and-pillar mining
Question 147Single Answer
What complicates the use of hydraulic mining in surface operations?
A
Uniform water availability
B
High environmental impact of water usage
C
Excessive equipment durability
D
Simplified sediment control
Question 148Single Answer
Which surface mining method requires extensive dewatering for operations in wetlands?
A
Strip mining
B
Dredging
C
Placer mining
D
Open-pit mining
Question 149Single Answer
What is a primary challenge in controlling subsidence in underground mining?
A
Uniform overburden strength
B
Simplified caving mechanics
C
Excessive monitoring systems
D
High surface impact prediction
Question 150Single Answer
Which underground mining method is most suitable for extracting massive, low-grade deposits?
A
Cut-and-fill mining
B
Sublevel stoping
C
Longwall mining
D
Block caving
Question 151Single Answer
What complicates the design of ventilation systems in deep underground mines?
A
High heat and humidity levels
B
Uniform airflow distribution
C
Excessive fan capacity
D
Simplified airway maintenance
Question 152Single Answer
What is a key limitation of sublevel caving in underground mining?
A
Excessive ore recovery
B
Simplified ventilation
C
Uniform ground support
D
High dilution rates
Question 153Single Answer
Which underground mining method is most prone to spontaneous combustion in coal seams?
A
Longwall mining
B
Room-and-pillar mining
C
Sublevel stoping
D
Cut-and-fill mining
Question 154Single Answer
Which surface mining method is most suitable for extracting alluvial gold deposits?
A
Open-pit mining
B
Strip mining
C
Placer mining
D
Quarrying
Question 155Single Answer
Which underground mining method is most suitable for steeply dipping, narrow ore veins?
A
Room-and-pillar mining
B
Shrinkage stoping
C
Sublevel caving
D
Longwall mining
Question 156Single Answer
What is a primary limitation of strip mining in surface operations?
A
High overburden handling costs
B
Excessive ore recovery
C
Uniform land reclamation
D
Simplified equipment maintenance
Question 157Single Answer
Which surface mining method is most effective for extracting heavy minerals from beach sands?
A
Open-pit mining
B
Strip mining
C
Quarrying
D
Placer mining
Question 158Single Answer
What complicates the use of in-situ leaching in surface mining?
A
Controlling groundwater contamination
B
Uniform mineral dissolution
C
Excessive solution recovery
D
Simplified chemical handling
Question 159Single Answer
Which underground mining method requires continuous backfilling to maintain stability?
A
Longwall mining
B
Sublevel caving
C
Cut-and-fill mining
D
Room-and-pillar mining
Question 160Single Answer
What is a key challenge in controlling noise pollution in open-pit mining?
A
Uniform equipment silencing
B
Simplified operational controls
C
Excessive sound barriers
D
High machinery noise levels
Question 161Single Answer
What complicates the use of dredging in surface mining?
A
Uniform sediment composition
B
Excessive equipment availability
C
High environmental impact on water bodies
D
Simplified material handling
Question 162Single Answer
Which underground mining method is most suitable for massive, low-grade deposits?
A
Cut-and-fill mining
B
Longwall mining
C
Block caving
D
Sublevel stoping
Question 163Single Answer
What complicates the design of ventilation systems in deep underground mines?
A
Uniform airflow distribution
B
High heat and humidity levels
C
Excessive fan capacity
D
Simplified airway maintenance
Question 164Single Answer
What is a primary limitation of strip mining in surface operations?
A
High overburden handling costs
B
Excessive ore recovery
C
Uniform land reclamation
D
Simplified equipment maintenance
Question 165Single Answer
What complicates the use of in-situ leaching in surface mining?
A
Controlling groundwater contamination
B
Uniform mineral dissolution
C
Excessive solution recovery
D
Simplified chemical handling
Question 166Single Answer
What is a primary limitation of strip mining in surface operations?
A
High overburden handling costs
B
Excessive ore recovery
C
Uniform land reclamation
D
Simplified equipment maintenance
Question 167Single Answer
What complicates the use of in-situ leaching in surface mining?
A
Uniform mineral dissolution
B
Excessive solution recovery
C
Controlling groundwater contamination
D
Simplified chemical handling
Question 168Single Answer
What is a primary limitation of strip mining in surface operations?
A
Excessive ore recovery
B
High overburden handling costs
C
Uniform land reclamation
D
Simplified equipment maintenance
Question 169Single Answer
Which gas, commonly found in underground mines, is primarily responsible for most mine explosions?
A
Methane
B
Carbon dioxide
C
Carbon monoxide
D
Hydrogen sulfide
Question 170Single Answer
What is the specific gravity of methane compared to air, affecting its behavior in mine ventilation?
A
1.52
B
1.10
C
0.55
D
0.83
Question 171Single Answer
Which gas, when present in high concentrations, can displace oxygen and cause asphyxiation?
A
Nitrogen dioxide
B
Hydrogen
C
Sulfur dioxide
D
Carbon dioxide
Question 172Single Answer
What is the primary source of carbon monoxide in underground coal mines?
A
Blasting operations
B
Incomplete combustion of coal
C
Vehicle exhausts
D
Natural gas seeps
Question 173Single Answer
Which instrument is most commonly used to detect methane in underground mines?
A
Methanometer
B
Anemometer
C
Hygrometer
D
Barometer
Question 174Single Answer
What is the explosive range of methane when mixed with air?
A
2–5%
B
25–35%
C
15–25%
D
5–15%
Question 175Single Answer
Which gas is known as “blackdamp” in mining terminology?
A
Carbon dioxide
B
Carbon monoxide
C
Methane
D
Hydrogen sulfide
Question 176Single Answer
What is the primary health effect of exposure to high levels of hydrogen sulfide in mines?
A
Respiratory irritation
B
Central nervous system depression
C
Asphyxiation
D
Skin burns
Question 177Single Answer
Which gas, often produced during blasting, is reddish-brown and highly toxic?
A
Carbon monoxide
B
Sulfur dioxide
C
Nitrogen dioxide
D
Ammonia
Question 178Single Answer
What is the threshold limit value (TLV) for carbon monoxide exposure in mines as per standard safety guidelines?
A
10 ppm
B
25 ppm
C
50 ppm
D
100 ppm
Question 179Single Answer
Which gas is odorless, colorless, and highly toxic, often called the “silent killer” in mines?
A
Methane
B
Hydrogen sulfide
C
Carbon monoxide
D
Nitrogen dioxide
Question 180Single Answer
What is the primary method to control methane accumulation in underground mines?
A
Increasing air pressure
B
Water spraying
C
Effective ventilation systems
D
Chemical neutralization
Question 181Single Answer
Which gas is commonly associated with the smell of rotten eggs in mines?
A
Carbon dioxide
B
Sulfur dioxide
C
Hydrogen sulfide
D
Ammonia
Question 182Single Answer
What is the approximate specific gravity of carbon dioxide compared to air?
A
0.55
B
1.10
C
1.52
D
0.83
Question 183Single Answer
Which gas is produced by the oxidation of pyrite in mines?
A
Methane
B
Nitrogen dioxide
C
Carbon monoxide
D
Sulfur dioxide
Question 184Single Answer
What is the primary source of nitrogen dioxide in underground mines?
A
Coal combustion
B
Vehicle exhausts
C
Blasting with explosives
D
Bacterial decomposition
Question 185Single Answer
Which gas can cause “afterdamp” conditions following a mine explosion?
A
Methane
B
Carbon monoxide
C
Hydrogen sulfide
D
Nitrogen
Question 186Single Answer
What is the minimum oxygen concentration required for safe working conditions in mines?
A
15%
B
25%
C
21%
D
19.5%
Question 187Single Answer
Which gas is most likely to accumulate in low-lying areas of a mine due to its high density?
A
Methane
B
Carbon monoxide
C
Hydrogen
D
Carbon dioxide
Question 188Single Answer
What is the primary method for detecting carbon monoxide in mines?
A
Flame safety lamp
B
Multi-gas detector
C
Anemometer
D
Wet bulb thermometer
Question 189Single Answer
Which gas is a byproduct of bacterial decomposition in waterlogged mine areas?
A
Methane
B
Nitrogen dioxide
C
Carbon dioxide
D
Hydrogen sulfide
Question 190Single Answer
What is the explosive range of carbon monoxide when mixed with air?
A
12.5–74%
B
5–15%
C
2–10%
D
20–50%
Question 191Single Answer
Which gas is known as “firedamp” in mining terminology?
A
Methane
B
Carbon dioxide
C
Carbon monoxide
D
Hydrogen sulfide
Question 192Single Answer
What is the primary health effect of prolonged exposure to low levels of nitrogen dioxide?
A
Skin irritation
B
Neurological disorders
C
Respiratory damage
D
Cardiovascular issues
Question 193Single Answer
Which gas is most likely to be released during spontaneous combustion in coal mines?
A
Methane
B
Sulfur dioxide
C
Carbon monoxide
D
Hydrogen
Question 194Single Answer
What is the primary purpose of a methanometer in underground mines?
A
Measure air velocity
B
Detect methane concentration
C
Monitor oxygen levels
D
Measure humidity
Question 195Single Answer
Which gas can cause a “stinkdamp” condition in mines?
A
Hydrogen sulfide
B
Carbon dioxide
C
Methane
D
Nitrogen dioxide
Question 196Single Answer
What is the approximate specific gravity of hydrogen sulfide compared to air?
A
0.55
B
1.19
C
1.52
D
0.83
Question 197Single Answer
Which gas is most likely to be detected after a mine fire?
A
Methane
B
Hydrogen sulfide
C
Carbon monoxide
D
Nitrogen dioxide
Question 198Single Answer
What is the primary method to remove toxic gases from mine airways?
A
Water spraying
B
Forced ventilation
C
Chemical absorption
D
Natural diffusion
Question 199Single Answer
Which gas is a major contributor to acid mine drainage when oxidized?
A
Methane
B
Hydrogen sulfide
C
Carbon monoxide
D
Sulfur dioxide
Question 200Single Answer
What is the permissible exposure limit (PEL) for hydrogen sulfide in mines?
A
10 ppm
B
100 ppm
C
50 ppm
D
20 ppm
Question 201Single Answer
Which gas is most likely to be released from coal seams during mining operations?
A
Carbon dioxide
B
Hydrogen sulfide
C
Nitrogen dioxide
D
Methane
Question 202Single Answer
What is the primary effect of inhaling high concentrations of carbon dioxide in mines?
A
Eye irritation
B
Neurological damage
C
Skin irritation
D
Asphyxiation
Question 203Single Answer
Which gas is detected using a canary in historical mining practices?
A
Methane
B
Nitrogen dioxide
C
Hydrogen sulfide
D
Carbon monoxide
Question 204Single Answer
What is the primary source of methane in underground coal mines?
A
Blasting operations
B
Bacterial decomposition
C
Vehicle exhausts
D
Coal seam degassing
Question 205Single Answer
Which gas is most likely to cause respiratory irritation in miners?
A
Carbon monoxide
B
Nitrogen dioxide
C
Methane
D
Carbon dioxide
Question 206Single Answer
What is the approximate specific gravity of carbon monoxide compared to air?
A
0.55
B
1.52
C
0.97
D
1.19
Question 207Single Answer
Which gas is a byproduct of explosives used in mining operations?
A
Methane
B
Nitrogen dioxide
C
Carbon dioxide
D
Hydrogen sulfide
Question 208Single Answer
What is the primary method to prevent methane explosions in mines?
A
Increasing humidity
B
Chemical neutralization
C
Dilution through ventilation
D
Sealing mine entries
Question 209Single Answer
Which gas is known as “whitedamp” in mining terminology?
A
Carbon dioxide
B
Methane
C
Hydrogen sulfide
D
Carbon monoxide
Question 210Single Answer
What is the primary health effect of exposure to low levels of hydrogen sulfide over time?