📚 Exam by Category
▾
Objective Questions

Latest GATE Metallurgical Engineering Exam Question (Objective Questions), MCQ in English

Subjects : General Aptitude, Engineering Mathematics, Metallurgical Engineering

Question Bank GATE Metallurgical Engineering Exam (Only MCQ ) - English
Back to Exam

General Aptitude

Question 1Single Answer
Inhaling the smoke from a burning _____ could _____ you quickly.
  1. A
    tire/tier
  2. B
    tire/tyre
  3. C
    tyre/tire
  4. D
    tyre/tier
Question 2Single Answer
Rice, a versatile and inexpensive source of carbohydrate, is a critical component of diet worldwide. Climate change, causing extreme weather, poses a threat to sustained availability of rice. Scientists are working on developing Green Super Rice (GSR), which is resilient under extreme weather conditions yet gives higher yields sustainably.
Which one of the following is the CORRECT logical inference based on the information given in the above passage ?
  1. A
    GSR is an alternative to regular rice, but it grows only in an extreme weather
  2. B
    GSR be used in future in response to adverse effects of climate change
  3. C
    GSR grows in an extreme weather, but the quantity of produce is lesser than regular rice
  4. D
    Regular rice will continue to provide good yields even in extreme weather
Question 3Single Answer
The cost price of 20 articles is the same as the selling price of x articles. If the profit is 25%, then the value of x is :
  1. A
    15
  2. B
    16
  3. C
    18
  4. D
    25
Question 4Single Answer
Pipes P and Q can fill a storage tank full of water in 10 and 6 minutes, respectively. Pipe R draws the water out from the storage tank at a rate of 34 litres per minute. P, Q and R operate at a constant rate. If it takes one hour to completely empty a full storage tank with all the pipes operating simultaneously, what is the capacity of the storage tank (in litres) ? 
  1. A
    26.8 
  2. B
    60.0 
  3. C
    120.0
  4. D
    127.5
Question 5Single Answer
Choose the grammatically correct sentence?
  1. A
    Neither of the robots are functioning properly
  2. B
    Neither robots is functioning properly
  3. C
    Neither of the robot are functioning properly
  4. D
    Neither of the robots is functioning properly

Engineering Mathematics

Question 6Single Answer
Consider the following expression :
where z, y, and t are variables, and   is a complex number. The partial differential equation derived from the above expression is
  1. A
  2. B
  3. C
  4. D
Question 7Single Answer
For the equation
the correct description is
  1. A
    an ordinary differential equation of order 3 and degree 2 
  2. B
    an ordinary differential equation of order 3 and degree 3 
  3. C
    an ordinary differential equation of order 2 and degree 3 
  4. D
    an ordinary differential equation of order 3 and degree 
Question 8Single Answer
The value of (1 + i)12, where  , is.
  1. A
    – 64 i 
  2. B
    64 i
  3. C
    64 
  4. D
    – 64
Question 9Single Answer
If (A=\begin{bmatrix}1&2\3&4\end{bmatrix}), what is (\det(A))?
  1. A
    2
  2. B
    (-2)
  3. C
    5
  4. D
    10
Question 10Single Answer
If (A) is a (3\times3) matrix with (\det(A)=5), what is (\det(2A))?
  1. A
    10
  2. B
    40
  3. C
    20
  4. D
    80

Metallurgical Engineering

Question 11Single Answer
According to the First Law of Thermodynamics, what is conserved in an isolated system?
  1. A
    Entropy
  2. B
    Internal energy
  3. C
    Gibbs free energy
  4. D
    Enthalpy
Question 12Single Answer
The Second Law of Thermodynamics implies that:
  1. A
    Energy can be created in a closed system
  2. B
    Entropy of an isolated system never decreases
  3. C
    Heat flows from cold to hot spontaneously
  4. D
    Enthalpy remains constant in all processes
Question 13Single Answer
In an irreversible process, the entropy change of the universe is:
  1. A
    Zero
  2. B
    Positive
  3. C
    Negative
  4. D
    Equal to the system’s entropy change
Question 14Single Answer
The Helmholtz free energy (A) is defined as:
  1. A
    A = U + TS
  2. B
    A = H + TS
  3. C
    A = U - TS
  4. D
    A = H - TS
Question 15Single Answer
For a reversible adiabatic process, which quantity remains constant?
  1. A
    Enthalpy
  2. B
    Entropy
  3. C
    Gibbs free energy
  4. D
    Internal energy
Question 16Single Answer
In a metallurgical process, the spontaneity of a reaction at high temperature is primarily governed by:
  1. A
    Entropy change
  2. B
    Enthalpy change
  3. C
    Internal energy change
  4. D
    Volume change
Question 17Single Answer
In a metallurgical roasting process, the entropy change is typically positive due to:
  1. A
    Decrease in temperature
  2. B
    Reduction in system volume
  3. C
    Formation of gaseous products
  4. D
    Increase in internal energy
Question 18Single Answer
The Gibbs free energy (G) is defined as:
  1. A
    G = U + PV - TS
  2. B
    G = H + TS
  3. C
    G = H - TS
  4. D
    G = U - PV + TS
Question 19Single Answer
For a reversible isothermal compression of an ideal gas, the work done is:
  1. A
    Positive
  2. B
    Equal to the heat transfer
  3. C
    Zero
  4. D
    Negative
Question 20Single Answer
For a reaction at constant volume, the heat absorbed is equal to:
  1. A
    Change in internal energy
  2. B
    Change in Gibbs free energy
  3. C
    Change in enthalpy
  4. D
    Change in Helmholtz free energy
Question 21Single Answer
The spontaneity of a metallurgical process at low temperature is primarily driven by:
  1. A
    Entropy change
  2. B
    Volume change
  3. C
    Internal energy change
  4. D
    Enthalpy change
Question 22Single Answer
The First Law of Thermodynamics is a statement of:
  1. A
    Entropy conservation
  2. B
    Energy conservation
  3. C
    Enthalpy conservation
  4. D
    Gibbs free energy conservation
Question 23Single Answer
For a reversible adiabatic expansion of an ideal gas, the temperature:
  1. A
    Increases
  2. B
    Remains constant
  3. C
    Decreases
  4. D
    Equals the surroundings
Question 24Single Answer
The Gibbs free energy change for a reaction at equilibrium is:
  1. A
    Positive
  2. B
    Zero
  3. C
    Negative
  4. D
    Equal to the enthalpy change
Question 25Single Answer
In a metallurgical process, the entropy change for the formation of a solid from a gas is typically:
  1. A
    Positive
  2. B
    Equal to the enthalpy change
  3. C
    Zero
  4. D
    Negative
Question 26Single Answer
The enthalpy of a system is defined as:
  1. A
    H = U + PV
  2. B
    H = U - PV
  3. C
    H = U + TS
  4. D
    H = U - TS
Question 27Single Answer
In a metallurgical oxidation reaction, the entropy change is typically:
  1. A
    Equal to the internal energy change
  2. B
    Negative due to gas consumption
  3. C
    Zero due to constant temperature
  4. D
    Positive due to gas formation
Question 28Single Answer
The Second Law of Thermodynamics implies that in an isolated system:
  1. A
    Entropy increases
  2. B
    Energy decreases
  3. C
    Enthalpy remains constant
  4. D
    Gibbs free energy increases
Question 29Single Answer
The Gibbs free energy change for a non-spontaneous reaction is:
  1. A
    Positive
  2. B
    Negative
  3. C
    Zero
  4. D
    Equal to the entropy change
Question 30Single Answer
In a reversible isothermal expansion, the change in entropy of the system is:
  1. A
    Negative
  2. B
    Equal to the enthalpy change
  3. C
    Zero
  4. D
    Positive
Question 31Single Answer
For a system at constant temperature and volume, the spontaneity is determined by:
  1. A
    Gibbs free energy
  2. B
    Helmholtz free energy
  3. C
    Enthalpy
  4. D
    Internal energy
Question 32Single Answer
The entropy change for a reversible isothermal compression of an ideal gas is:
  1. A
    Positive
  2. B
    Zero
  3. C
    Negative
  4. D
    Equal to the work done
Question 33Single Answer
In a metallurgical process, the enthalpy change for an exothermic reaction is:
  1. A
    Positive
  2. B
    Negative
  3. C
    Zero
  4. D
    Equal to the entropy change
Question 34Single Answer
The Second Law of Thermodynamics prohibits:
  1. A
    Energy conservation
  2. B
    Gibbs free energy decrease
  3. C
    Enthalpy increase in a closed system
  4. D
    Heat flow from cold to hot without work
Question 35Single Answer
In a metallurgical roasting process, the entropy increase is primarily due to:
  1. A
    Formation of gaseous products
  2. B
    Decrease in system volume
  3. C
    Reduction in temperature
  4. D
    Increase in internal energy
Question 36Single Answer
For a closed system with work defined as positive when done by the system, the first law is:
  1. A
    dU = δQ + δW
  2. B
    dU = -δQ - δW
  3. C
    dU = δW - δQ
  4. D
    dU = δQ - δW
Question 37Single Answer
At constant volume, when only P-V work is possible, the heat supplied reversibly or irreversibly equals:
  1. A
    ΔG
  2. B
    ΔA
  3. C
    ΔH
  4. D
    ΔU
Question 38Single Answer
At constant pressure, when only P-V work is involved, heat exchanged equals:
  1. A
    ΔU
  2. B
    TΔS only
  3. C
    ΔG
  4. D
    ΔH
Question 39Single Answer
Enthalpy is defined by:
  1. A
    H = U + PV
  2. B
    H = G - TS
  3. C
    H = U - PV
  4. D
    H = TS - PV
Question 40Single Answer
Helmholtz free energy is defined by:
  1. A
    A = U + TS
  2. B
    A = G + PV
  3. C
    A = H - TS
  4. D
    A = U - TS
Question 41Single Answer
Gibbs free energy is defined by:
  1. A
    G = H + TS
  2. B
    G = U - PV
  3. C
    G = A - PV
  4. D
    G = H - TS
Question 42Single Answer
For a simple compressible closed system of fixed composition, the fundamental relation for internal energy is:
  1. A
    dU = -S dT + V dP
  2. B
    dU = V dP - S dT
  3. C
    dU = T dS + P dV
  4. D
    dU = T dS - P dV
Question 43Single Answer
For a simple compressible closed system of fixed composition, the differential of enthalpy is:
  1. A
    dH = -S dT + V dP
  2. B
    dH = T dS + V dP
  3. C
    dH = T dS - V dP
  4. D
    dH = -P dV - S dT
Question 44Single Answer
For a simple compressible closed system of fixed composition, the differential of Helmholtz free energy is:
  1. A
    dA = -S dT + V dP
  2. B
    dA = T dS - P dV
  3. C
    dA = -S dT - P dV
  4. D
    dA = S dT - P dV
Question 45Single Answer
For a simple compressible closed system of fixed composition, the differential of Gibbs free energy is:
  1. A
    dG = -P dV - S dT
  2. B
    dG = -V dP - S dT
  3. C
    dG = T dS + V dP
  4. D
    dG = V dP - S dT
Question 46Single Answer
At constant temperature and pressure, the criterion for spontaneous change in a closed system is:
  1. A
    ΔG < 0
  2. B
    ΔG > 0
  3. C
    ΔS_system < 0 always
  4. D
    ΔA > 0
Question 47Single Answer
At constant temperature and volume, the appropriate potential that decreases in a spontaneous process is:
  1. A
    Gibbs free energy
  2. B
    Enthalpy
  3. C
    Internal energy always
  4. D
    Helmholtz free energy
Question 48Single Answer
For an isolated system, the second law requires:
  1. A
    Enthalpy is constant and entropy decreases
  2. B
    Entropy cannot decrease
  3. C
    Entropy must decrease
  4. D
    Gibbs energy must increase
Question 49Single Answer
The Clausius inequality for any cyclic process is:
  1. A
    ∮δQ/T ≥ 0
  2. B
    ∮δQ/T ≤ 0
  3. C
    ∮δQ/T = 1
  4. D
    ∮δQ/T = ΔG
Question 50Single Answer
For a reversible adiabatic process in a closed system, the entropy change is:
  1. A
    Equal to ΔH/T
  2. B
    Negative
  3. C
    Zero
  4. D
    Positive
Important Questions Package

GATE Metallurgical Engineering Exam Online Question Bank Package

Buy GATE Metallurgical Engineering Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GATE Metallurgical Engineering question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 1000 Question With Answer
₹101 [₹500]
2.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 2000 Question With Answer
₹151 [₹500]
3.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 3000 Question With Answer
₹181 [₹500]
4.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 4000 Question With Answer
₹210 [₹500]
5.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 5000 Question With Answer
₹221 [₹500]
6.GATE Metallurgical Engineering Exam (Only MCQ ) - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹550]
7.GATE Metallurgical Engineering Exam (Only MCQ ) Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹650]
Back to Exam
Question for GATE Metallurgical Engineering 2027 - Quiz / Questions / MCQ - Toppersexam