📚 Exam by Category
▾
Objective Questions

Latest BMRCL Section Engineer Exam Question (Objective Questions), MCQ in English

Subjects : General Knowledge, Computer Science, Electronics & Communication, Mechanical, Electrical

Question Bank BMRCL Section Engineer – Systems Exam - English
Back to Exam

General Knowledge

Question 1Single Answer
Yojna a weekly journal
  1. A
    Ministry of Finance        
  2. B
    Ministry of Information and Broadcastin
  3. C
    Ministry of Rural Development
  4. D
    Planning Commission
Question 2Single Answer
Kurukshetra a journal on rural development is published by
  1. A
    Ministry of Finance 
  2. B
    Ministry of Information and Broadcastin
  3. C
    Ministry of Rural Development
  4. D
    Planning Commission
Question 3Single Answer
Devaluation of a currency means
  1. A
    Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
  2. B
    Reduction in the value of a currency vis-à-vis major internationally traded currencies
  3. C
    Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
  4. D
    Permitting the currency to seek its worth in the international market
Question 4Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
            1. a large number of farmers are illiterate and know little about scientific agriculture
            2. prices of primary products are lower than those of manufactured products
            3. Investments in agriculture has been low when compared to investment in industry
  1. A
    1 and 3
  2. B
    2 and 3
  3. C
    1 and 2
  4. D
    1,2 and 3
Question 5Single Answer
Which of the following programmes aims at the promotion of savings among rural women
  1. A
    Rashtriya Mahila Kosh
  2. B
    Indira Mahila Yojna
  3. C
    Jawahar Rozgar Yojna
  4. D
    Mahila Samridhi Yojna
Question 6Single Answer
The state of Karnataka lies in........... region of India.
  1. A
    North east
  2. B
    South east
  3. C
    North west
  4. D
    South west
Question 7Single Answer
. Karnataka shares its boundaries with
  1. A
    Tamil Nadu
  2. B
    Madhya Pradesh
  3. C
    Odisha
  4. D
    West Bengal
Question 8Single Answer
Which summit on Artificial Intelligence was hosted by India in February 2026?
  1. A
    World AI Congress
  2. B
    AI Action Summit
  3. C
    India AI Impact Summit 2026
  4. D
    Global AI Forum
Question 9Single Answer
Where was the India AI Impact Summit 2026 organized?
  1. A
    Pragati Maidan, Delhi
  2. B
    Vigyan Bhawan, New Delhi
  3. C
    Bharat Mandapam, New Delhi
  4. D
    Hyderabad International Convention Centre
Question 10Single Answer
Which ministry organized the India AI Impact Summit 2026?
  1. A
    Ministry of Science and Technology
  2. B
    Ministry of Electronics and Information Technology
  3. C
    Ministry of Commerce
  4. D
    Ministry of Education

Computer Science

Question 11Single Answer
The 0 and 1 in the binary numbering system are called Binary Digits or
  1. A
    Bytes      
  2. B
    Kilobytes
  3. C
    Decimal bytes
  4. D
    Bits          
Question 12Single Answer
What language does a browser typically interpret to display information from the World Wide Web ?  
  1. A
    Machine Code
  2. B
    Assembly Language
  3. C
    HTML
  4. D
    C++  
Question 13Single Answer
______ is the process of finding errors in software code.
  1. A
    Compiling
  2. B
    Testing
  3. C
    Running
  4. D
    Debugging
Question 14Single Answer
The code for a Web page is written using _________.
  1. A
    A fifth generation language
  2. B
    WinZip
  3. C
    Peripherals
  4. D
    Hypertext Markup Language
Question 15Single Answer
A program is a sequence of ___________ written in a programming language.
  1. A
    Lines
  2. B
    Function
  3. C
    Instructions
  4. D
    Code words    
Question 16Single Answer
Which of the following languages is more suited to a structured program ?
  1. A
    PL/1
  2. B
    FORTRAN
  3. C
    BASIC
  4. D
    PASCAL
Question 17Single Answer
A computer program that converts assembly language to machine language to machine language is
  1. A
    compiler
  2. B
    Interpreter
  3. C
    Assembler
  4. D
    None of the above
Question 18Single Answer
The symbols used in an assembly language are
  1. A
    Codes
  2. B
    Mnemonics
  3. C
    Assembler
  4. D
    All of the above      
Question 19Single Answer
Which is a non-standard version of a computing language ?
  1. A
    PROLOG
  2. B
    APL
  3. C
    Army
  4. D
    PL/1
Question 20Single Answer
A language which is close to that used with in the computer is
  1. A
    High – level language
  2. B
    Assembly language
  3. C
    Low- level language
  4. D
    All of the above      

Electronics & Communication

Question 21Single Answer
At temperature of 298 Kelvin, Silicon is not suitable for most-electronic applications, due to small amount of conductivity. This can be altered by
  1. A
    Gettering
  2. B
    Doping
  3. C
    Squeezing
  4. D
    Sintering
Question 22Single Answer
By doping Germanium with Gallium, the types of semi-conductors formed are
1. N type
2. P type
3. Intrinsic
4. Extrinsic
  1. A
    1 and 4
  2. B
    2 and 4
  3. C
    1 and 3
  4. D
    2 and 3
Question 23Single Answer
An n-type of silicon can be formed by adding impurity of:
1. Phosphorous
2. Arsenic
3. Boron
4. Aluminum 
Which of the above are correct ?
  1. A
    1 and 2
  2. B
    2 and 3
  3. C
    3 and 4
  4. D
    1 and 4
Question 24Single Answer
According to Einstein’s relationship for a semiconductor, the ratio of diffusion constant to the mobility of the charge carriers is
  1. A
    Variable and is twice the volt equivalent of the temperature
  2. B
    Constant and is equal to the volt equivalent of the temperature
  3. C
    Equal to two and is twice the volt equivalent of the temperature
  4. D
    Equal to one and is equal to the volt equivalent of the temperature
Question 25Single Answer
Swept-out voltage in PIN diode happens when PIN diode is
  1. A
    Forward biased and the thickness of the depletion layer decreases till I-region becomes free of mobile carriers
  2. B
    Reverse biased and the thickness of the depletion layer increases till I-region becomes free of mobile carriers
  3. C
    Forward biased and the thickness of the depletion layer increases till I-region becomes free of mobile carriers
  4. D
    Reverse biased and the thickness of the depletion layer decreases till I-region becomes free of mobile carriers
Question 26Single Answer
The number of holes in an N-type silicon with intrinsic value 1.5 × 1010/cm3 and doping concentration of 1017/cm3, by using mass-action law is
  1. A
    6.67 × 106/cc
  2. B
    4.44 × 10-25/cc
  3. C
    1.5× 10-24/cc
  4. D
    2.25 × 103/cc
Question 27Single Answer
A tunnel-diode is best suited for
  1. A
    Very low frequencies
  2. B
    50 Hz
  3. C
    100 Hz
  4. D
    Microwave frequencies
Question 28Single Answer
Small recovery time of a diode is most significant for
  1. A
    Line-frequency rectification
  2. B
    Switching operations
  3. C
    High-frequency rectifications and switching operations
  4. D
    Low-frequency rectifications and switching operations
Question 29Single Answer
In JFET, when operated above the pinch-off voltage, the
  1. A
    Depletion region becomes smaller
  2. B
    Drain current starts decreasing
  3. C
    Drain current remains practically constant
  4. D
    Drain current increases steeply
Question 30Single Answer
Thermal runaway is not possible in FET because, as the temperature of FET increases
  1. A
    The drain current increases
  2. B
    The mobility of charge carriers decreases
  3. C
    The mobility of charge carriers increases
  4. D
    The transconductance increases
Question 31Single Answer
Which one of the following helps experimental confirmation of the Crystalline state of matter?
  1. A
    Shock compression
  2. B
    Photo emission
  3. C
    Conductivity measurements
  4. D
    X-ray diffraction
Question 32Single Answer
The electrical conductivity of pure semiconductor is:
  1. A
    Proportional to temperature
  2. B
    Increases exponentially with temperature
  3. C
    Decreases exponentially with temperature
  4. D
    Not altered with temperature
Question 33Single Answer
Consider the following statements pertaining to the resistance of a conductor:
1. Resistance can be simply defined as the ratio of voltage across the conductor to the current through the conductor. This is, in fact, Georg Ohm’s law.
2. Resistance is a function of voltage and current.
3. Resistance is a function of conductor geometry and its conductivity
Which of the above statements are correct?
  1. A
    1 and 2 only
  2. B
    2 and 3 only
  3. C
    1 and 3 only
  4. D
    1, 2 and 3
Question 34Single Answer
The ratio of ionic radii of Cations i.e.and that of Anions i.e.for stable and unstable ceramic crystal structure, is:
  1. A
    Less than unity
  2. B
    Greater than unity
  3. C
    Unity
  4. D
    Either lesser or greater than unity
Question 35Single Answer
Which one of the following statements is correct?
  1. A
    For insulators the band-gap is narrow as compared to semiconductors
  2. B
    For insulators the band-gap is relatively wide whereas for semiconductors it is narrow
  3. C
    The band-gap is narrow in width for both the insulators and conductors
  4. D
    The band-gap is equally wide for both conductors and semiconductors
Question 36Single Answer
In an extrinsic semiconductor the conductivity significantly depends upon:
  1. A
    Majority charge carriers generated due to impurity doping
  2. B
    Minority charge carriers generated due to thermal agitation
  3. C
    Majority charge carriers generated due to thermal agitation
  4. D
    Minority charge carriers generated due to impurity doping
Question 37Single Answer
In some substances when an electric field is applied the substance become polarized. The electrons and nucleii assume new geometrical positions and the mechanical dimensions are altered. This phenomenon is called:
  1. A
    Electrostriction
  2. B
    Hall-Effect
  3. C
    Polarization
  4. D
    Magnetization
Question 38Single Answer
In ferromagnetic materials, the net magnetic moment created due to magnetization by an applied field as:
  1. A
    Normal to the applied field
  2. B
    Adds to the applied field
  3. C
    In line with magneto motive force
  4. D
    Subtracts from the applied field
Question 39Single Answer
At what temperatures domains lose their ferromagnetic properties?
  1. A
    Above ferromagnetic Curie temperature
  2. B
    Below paramagnetic Curie temperature
  3. C
    Above 4
  4. D
    At room temperature
Question 40Single Answer
Which of the following materials does not have paramagnetic properties?
1. Rare earth elements (with incomplete shell)
2. Transition elements
3. Magnesium oxide
Select the correct answer from the codes given below:
  1. A
    1 only
  2. B
    2 only
  3. C
    3 only
  4. D
    1 and 2
Question 41Single Answer
In a superconducting magnet, wires of superconducting material are embedded in the thick copper matrix, because while the material is in the superconducting state:
  1. A
    The leakage current passes through copper part.
  2. B
    Copper part helps in conducting heat away from the superconductor
  3. C
    Copper part helps in overcoming the mechanical stress
  4. D
    Copper acts as an insulating cover for superconductor
Question 42Single Answer
The crystal structure of some Ceramic materials may be thought of being composed of electrically charged Cations and Anions, instead of Atoms, and as such:
  1. A
    The Cations are negatively charged, because they have given up their valence electrons to Anions which are positively charged.
  2. B
    The Cations are positively charged, because they have given up their valence electrons to Anions which are negatively charged.
  3. C
    The Cations are positively charged, because they have added one electron to their valence electron borrowing from Anions which are negatively charged.
  4. D
    The Cations are negatively charged, as they are non-metallic whereas Anions are positively charged being metallic.
Question 43Single Answer
Manganin alloy used for making resistors for laboratory instruments contains:
  1. A
    Copper, Aluminium and Manganese
  2. B
    Copper, Nickel and Manganese
  3. C
    Aluminium, Nickel and Manganese
  4. D
    Chromium, Nickel and manganese
Question 44Single Answer
A rolled-paper capacitor of value 0.02  is to be constructed using two strips of aluminiumof width 6 cm, and wax impregnated paper of thickness 0.06 mm whose relative permittivity is 3. The length of foil strips should be:
  1. A
    0.3765 m
  2. B
    0.4765 m
  3. C
    0.5765 m
  4. D
    0.7765 m
Question 45Single Answer
In a semiconductor diode, cut-in voltage is the voltage:
  1. A
    up to which the current is zero
  2. B
    up to which the current is very small
  3. C
    at which the current is 10% of the maximum rated current
  4. D
    at which depletion layer is formed
Question 46Single Answer
Which of the following regions of operation are mainly responsible for heating of the transistor under switching operation?
1. Saturation region
2. Cut-off region
3. Transition from saturation to cut-off
4. Transition from cut-off to saturation
Select the correct answer using the codes given below
  1. A
    1, 2 and 4 only
  2. B
    1, 3 and 4 only
  3. C
    2 and 3 only
  4. D
    1 and 3 only
Question 47Single Answer
In a sinusoidal oscillator, sustained oscillations will be produced only if the loop gain (at the oscillation frequency) is
  1. A
    Less than unity but not zero
  2. B
    Zero
  3. C
    Unity
  4. D
    Greater than unity
Question 48Single Answer
The Class-B push-pull amplifier is an efficient two –transistor circuit, in which the two transistors operate in the following way:
  1. A
    Both transistors operate in the active region throughout the negative ac cycle
  2. B
    Both transistors operate in the active region for more than half-cycle but less than a whole cycle
  3. C
    One transistor conducts during the positive half-cycle and the other during the negative half-cycle
  4. D
    Full supply voltage appears across each of the transistors
Question 49Single Answer
PAC stands for______.
  1. A
    Permanent angle converter
  2. B
    Phase angle converter
  3. C
    Phase angle components
  4. D
    Phase angle capacitor
  5. E
    None of these
Question 50Single Answer
For normal operation of a transistor
  1. A
    Forward bias the emitter diode and reverse bias the collector diode
  2. B
    Forward bias the emitter diode as well as the collector diode
  3. C
    Reverse bias the emitter diode as well as the collector diode
  4. D
    Reverse bias the emitter diode and forward bias the collector diode
Important Questions Package

BMRCL Section Engineer Exam Online Question Bank Package

Buy BMRCL Section Engineer Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BMRCL Section Engineer question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.BMRCL Section Engineer – Systems Exam - English
Description : 1000 Question With Answer
₹51 [₹500]
2.BMRCL Section Engineer – Systems Exam - English
Description : 2000 Question With Answer
₹81 [₹500]
3.BMRCL Section Engineer – Civil Exam - English
Description : 1000 Question With Answer
₹51 [₹500]
4.BMRCL Section Engineer – Civil Exam - English
Description : 1500 Question With Answer
₹61 [₹500]
5.BMRCL Section Engineer – Systems Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹51 [₹450]
6.BMRCL Section Engineer – Civil Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹51 [₹450]
7.BMRCL Section Engineer – Systems Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
8.BMRCL Section Engineer – Civil Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
9.BMRCL Section Engineer Civil Exam - English (old)
Description : 2000 Question with Answer.
₹231 [₹500]
10.BMRCL Section Engineer Exam (Section Engineer – Systems) - English (OLD)
Description : 2400 Question With Answer
₹181 [₹500]
Back to Exam
Question for BMRCL Section Engineer 2026 - Quiz / Questions / MCQ - Toppersexam